MPC8536DS Freescale Semiconductor, MPC8536DS Datasheet - Page 571

BOARD DEV SYSTEM MPC8536E

MPC8536DS

Manufacturer Part Number
MPC8536DS
Description
BOARD DEV SYSTEM MPC8536E
Manufacturer
Freescale Semiconductor
Series
PowerQUICC III™r
Type
MPUr
Datasheets

Specifications of MPC8536DS

Contents
Board, Software and Documentation
Processor Series
MPC85xx
Core
e500
Data Bus Width
32 bit
Maximum Clock Frequency
667 MHz
Operating Supply Voltage
- 0.3 V to + 1.21 V
Maximum Operating Temperature
+ 105 C
Data Ram Size
32 KB
Interface Type
SPI, USB
Program Memory Type
DDR2, DDR3, SDRAM
Core Size
32 Bit
Program Memory Size
544KB
Cpu Speed
1.5GHz
Digital Ic Case Style
BGA
No. Of Pins
783
Supply Voltage Range
0.95V To 1.05V
Rohs Compliant
Yes
For Use With/related Products
MPC8536
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
10.7.6.9
The MDEU interrupt mask register, shown in
given error (as defined in
this register is set, then the error is disabled; no error interrupt occurs and the interrupt status register is not
updated to reflect the error. If the corresponding bit is not set, then upon detection of an error, the interrupt
status register is updated to reflect the error, causing assertion of the error interrupt signal, and causing the
module to halt processing.
Offset 0x3_6038
Table 10-65
Freescale Semiconductor
W
R
58–60
62–63
0–48
Bits
Bits
0
57
61
49
50
51
describes MDEU interrupt status register fields.
MDEU Interrupt Mask Register
Table 10-65. MDEU Interrupt Status Register Field Descriptions (continued)
Name
Name
IFO
ICE
AE
IE
MPC8536E PowerQUICC III Integrated Processor Reference Manual, Rev. 1
Table 10-66. MDEU Interrupt Mask Register Field Descriptions
Section 10.7.6.8, “MDEU Interrupt Status
Address Error. An illegal read or write address was detected within the MDEU address
space.
0 No error detected
1 Address Error
Reserved
Input FIFO Overflow. The MDEU Input FIFO was pushed while full.
0 No overflow detected
1 Input FIFO has overflowed
Note: When operated through channel-controlled access, the SEC implements flow
Reserved
Reserved
Integrity Check Error. The supplied ICV did not match the one computed by the MDEU.
0 Integrity check error enabled. WARNING: Do not enable this if using EU status
1 Integrity check error disabled
Reserved
Internal Error. An internal processing error was detected while performing hashing.
0 Internal error enabled
1 Internal error disabled
Figure 10-90. MDEU Interrupt Mask Register
writeback (see bits IWSE and AWSE in
Register
control, and FIFO size is not a limit to data input size. When operated through
host-controlled access, the MDEU cannot accept FIFO inputs larger than 256
bytes without overflowing.
(CCR)”).
Figure
10-90, controls the result of detected errors. For a
48 49
ICE — IE ERE CE KSE DSE ME AE
Description
Description
50 51
Section 10.4.4.1, “Channel Configuration
52
Register”), if the corresponding bit in
53
54
55
56
Security Engine (SEC) 3.0
57 58
Access: Read/Write
60 61
IFO
10-141
62 63

Related parts for MPC8536DS