MPC8536DS Freescale Semiconductor, MPC8536DS Datasheet - Page 1346

• Manufacturer Part Number: MPC8536DS
• Description: BOARD DEV SYSTEM MPC8536E
• Manufacturer: Freescale Semiconductor
• Series: PowerQUICC III™r
• Type: MPUr

Specifications of MPC8536DS

• Contents: Board, Software and Documentation
• Processor Series: MPC85xx
• Core: e500
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 667 MHz
• Operating Supply Voltage: - 0.3 V to + 1.21 V
• Maximum Operating Temperature: + 105 C
• Data Ram Size: 32 KB
• Interface Type: SPI, USB
• Program Memory Type: DDR2, DDR3, SDRAM
• Core Size: 32 Bit
• Program Memory Size: 544KB
• Cpu Speed: 1.5GHz
• Digital Ic Case Style: BGA
• No. Of Pins: 783
• Supply Voltage Range: 0.95V To 1.05V
• Rohs Compliant: Yes
• For Use With/related Products: MPC8536
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Universal Serial Bus Interfaces
21-12
Bits
9–8
3–2
7
6
5
4
Name
ASP
ASE
PSE
IAA
LR
FS
Asynchronous schedule park mode count. This field defaults to 0x3H and is R/W. It contains a count of the
number of successive transactions the host controller is allowed to execute from a high-speed queue head
on the Asynchronous schedule before continuing traversal of the Asynchronous schedule. Valid values are
0x1H to 0x3H. Software must not write a zero to this field when ASPE is set as this will result in undefined
behavior.
Light host/device controller reset (OPTIONAL). Not implemented. Always 0.
Interrupt on async advance doorbell. Used as a doorbell by software to tell the USB controller to issue an
interrupt the next time it advances asynchronous schedule. Software must write a 1 to this bit to ring the
doorbell.
When the controller has evicted all appropriate cached schedule states, it sets USBSTS[AAI]. If
USBINTR[AAE] is set, the host controller will assert an interrupt at the next interrupt threshold.
The controller clears this bit after it has set USBSTS[AAI]. Software should not set this bit when the
asynchronous schedule is inactive. Doing so will yield undefined results.
This bit is only used in host mode. Setting this bit when the USB module is in device mode is selected will
result in undefined results.
Asynchronous schedule enable. Controls whether the controller skips processing the asynchronous
schedule. Only used in host mode.
0 Do not process the asynchronous schedule
1 Use the ASYNCLISTADDR register to access the asynchronous schedule.
Periodic schedule enable. Controls whether the controller skips processing the periodic schedule. Only
used in host mode.
0 Do not process the periodic schedule.
1 Use the PERIODICLISTBASE register to access the periodic schedule.
Frame list size. Together with bit 15 these bits make the FS[2:0] field. This field is read/write only if
programmable frame list flag in the HCCPARAMS registers is set to 1. This field specifies the size of the
frame list that controls which bits in FRINDEX should be used for the frame list current index. Only used in
host mode. Note that values below 256 elements are not defined in the EHCI specification.
000 1024 elements (4096 bytes)
001 512 elements (2048 bytes)
010 256 elements (1024 bytes)
011 128 elements (512 bytes)
100 64 elements (256 bytes)
101 32 elements (128 bytes)
110 16 elements (64 bytes)
111 8 elements (32 bytes)
MPC8536E PowerQUICC III Integrated Processor Reference Manual, Rev. 1
Table 21-9. USBCMD Register Field Descriptions (continued)
Description
Freescale Semiconductor