MC68F375BGMZP33 Freescale Semiconductor, MC68F375BGMZP33 Datasheet - Page 545

• Manufacturer Part Number: MC68F375BGMZP33
• Description: IC MPU 32BIT 33MHZ 217-PBGA
• Manufacturer: Freescale Semiconductor

Specifications of MC68F375BGMZP33

• Processor Type: M683xx 32-Bit
• Speed: 33MHz
• Voltage: 5V
• Mounting Type: Surface Mount
• Package / Case: 217-PBGA
• Processor Series: M683xx
• Core: CPU32
• Data Bus Width: 32 bit
• Program Memory Type: Flash
• Program Memory Size: 256 KB
• Data Ram Size: 10 KB
• Interface Type: SPI, SCI, CAN
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 48
• Number Of Timers: 16
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 16 Channel
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -
• Lead Free Status / Rohs Status: No

D.12 Period/Pulse-Width Accumulator (PPWA)
MC68F375
REFERENCE MANUAL
The period/pulse-width accumulator (PPWA) algorithm accumulates a 16-bit or 24-bit
sum of either the period or the pulse width of an input signal over a programmable
number of periods or pulses (from one to 255). After an accumulation period, the algo-
rithm can generate a link to a sequential block of up to eight channels. The user spec-
ifies a starting channel of the block and number of channels within the block.
Generation of links depends on the mode of operation.
Any channel can be used to measure an accumulated number of periods of an input
signal. A maximum of 24 bits can be used for the accumulation parameter. From one
to 255 period measurements can be made and summed with the previous measure-
ment(s) before the TPU interrupts the CPU, allowing instantaneous or average fre-
quency measurement, and the latest complete accumulation (over the programmed
number of periods).
The pulse width (high-time portion) of an input signal can be measured (up to 24 bits)
and added to a previous measurement over a programmable number of periods (one
to 255). This provides an instantaneous or average pulse-width measurement capa-
bility, allowing the latest complete accumulation (over the specified number of periods)
to always be available in a parameter.
By using the output compare function in conjunction with PPWA, an output signal can
be generated that is proportional to a specified input signal. The ratio of the input and
output frequency is programmable. One or more output signals with different frequen-
cies, yet proportional and synchronized to a single input signal, can be generated on
separate channels.
Figure D-21
function.
shows the host interface areas and parameter RAM for the PPWA
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
TPU ROM FUNCTIONS
Rev. 25 June 03
MOTOROLA
D-31