MC68F375BGMZP33 Freescale Semiconductor, MC68F375BGMZP33 Datasheet - Page 195

• Manufacturer Part Number: MC68F375BGMZP33
• Description: IC MPU 32BIT 33MHZ 217-PBGA
• Manufacturer: Freescale Semiconductor

Specifications of MC68F375BGMZP33

• Processor Type: M683xx 32-Bit
• Speed: 33MHz
• Voltage: 5V
• Mounting Type: Surface Mount
• Package / Case: 217-PBGA
• Processor Series: M683xx
• Core: CPU32
• Data Bus Width: 32 bit
• Program Memory Type: Flash
• Program Memory Size: 256 KB
• Data Ram Size: 10 KB
• Interface Type: SPI, SCI, CAN
• Maximum Clock Frequency: 16 MHz
• Number Of Programmable I/os: 48
• Number Of Timers: 16
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 16 Channel
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -
• Lead Free Status / Rohs Status: No

MC68F375
REFERENCE MANUAL
In all single-scan queue operating modes, the software must also enable the queue to
begin execution by writing the single-scan enable bit to a one in the queue’s control
register. The single-scan enable bits, SSE1 and SSE2, are provided for queue 1 and
queue 2 respectively.
Until the single-scan enable bit is set, any trigger events for that queue are ignored.
The single-scan enable bit may be set to a one during the write cycle, which selects
the single-scan queue operating mode. The single-scan enable bit can be written as a
one or a zero, but is always read as a zero. The completion flag, completion interrupt,
or queue status are used to determine when the queue has completed.
After the single-scan enable bit is set, a trigger event causes the QADC64 to begin
execution with the first CCW in the queue. The single-scan enable bit remains set until
the queue is completed. After the queue reaches completion, the QADC64 resets the
single-scan enable bit to zero. If the single-scan enable bit is written to a one or a zero
by the software before the queue scan is complete, the queue is not affected. How-
ever, if the software changes the queue operating mode, the new queue operating
mode and the value of the single-scan enable bit are recognized immediately. The
conversion in progress is aborted and the new queue operating mode takes effect.
In the software initiated single-scan mode, the writing of a 1 to the single-scan enable
bit causes the QADC64 to internally generate a trigger event and the queue execution
begins immediately. In the other single-scan queue operating modes, once the single-
scan enable bit is written, the selected trigger event must occur before the queue can
start. The single-scan enable bit allows the entire queue to be scanned once. A trigger
overrun is captured if a trigger event occurs during queue execution in the external trig-
ger single-scan mode and the interval timer single-scan mode.
In the interval timer single-scan mode, the next expiration of the timer is the trigger
event for the queue. After the queue execution is complete, the queue status is shown
as idle. The software can restart the queue by setting the single-scan enable bit to a
1. Queue execution begins with the first CCW in the queue.
Software Initiated Single-Scan Mode. Software can initiate the execution of a scan
sequence for queue 1 or 2 by selecting the software initiated single-scan mode, and
writing the single-scan enable bit in QACR1 or QACR2. A trigger event is generated
internally and the QADC64 immediately begins execution of the first CCW in the
queue. If a pause occurs, another trigger event is generated internally, and then exe-
cution continues without pausing.
• Software initiated single-scan mode
• External trigger single-scan mode
• External gated single-scan mode (queue 1 only)
• Interval timer single-scan mode
Queue 2 can not be programmed for external gated single-scan
mode.
QUEUED ANALOG-TO-DIGITAL CONVERTER MODULE-64
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
Rev. 25 June 03
NOTE
MOTOROLA
5-19