MPC8544VTALF Freescale Semiconductor, MPC8544VTALF Datasheet - Page 246

• Manufacturer Part Number: MPC8544VTALF
• Description: MPU POWERQUICC III 783-PBGA
• Manufacturer: Freescale Semiconductor

Specifications of MPC8544VTALF

• Processor Type: MPC85xx PowerQUICC III 32-Bit
• Speed: 667MHz
• Voltage: 1V
• Mounting Type: Surface Mount
• Package / Case: 783-FCPBGA
• Processor Series: MPC85xx
• Core: e500
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 667 MHz
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Data Ram Size: 32 KB
• I/o Voltage: 1.8 V, 3.3 V
• Interface Type: I2C, HSSI, DUART
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Core Register Summary
6.11
6.11.1
6-28
Reset
52–63
32–46
49–51
SPR 1010
Bits
Bits
51
47
48
52
53
54
W
R
32
Name
CSLC (Data) Cache snoop lock clear. Sticky bit set by hardware if a dcbi snoop (either internally or externally
CPE
CLO
CUL
CPI
—
—
Name
L1 Cache Configuration Registers
ABE
—
L1 Cache Control and Status Register 0 (L1CSR0)
MPC8544E PowerQUICC III Integrated Host Processor Family Reference Manual, Rev. 1
Reserved, should be cleared.
(Data) Cache parity enable
0 Parity checking of the cache disabled
1 Parity checking of the cache enabled
(Data) Parity error injection enable
0 Parity error injection disabled
1 Parity error injection enabled. Cache parity must also be enabled (CPE = 1) when this bit is set.
Reserved, should be cleared.
generated) invalidated a locked cache line. Note that the lock bit for that line is cleared whenever the line is
invalidated. This bit can be cleared only by software.
0 The cache has not encountered a dcbi snoop that invalidated a locked line.
1 The cache has encountered a dcbi snoop that invalidated a locked line.
(Data) Cache unable to lock. Sticky bit set by hardware and cleared by writing 0 to this bit location.
0 Indicates a lock set instruction was effective in the cache
1 Indicates a lock set instruction was not effective in the cache
(Data) Cache lock overflow. Sticky bit set by hardware and cleared by writing 0 to this bit location.
0 Indicates a lock overflow condition was not encountered in the cache
1 Indicates a lock overflow condition was encountered in the cache
Address broadcast enable. The e500 broadcasts cache management instructions (dcbst, dcblc
(CT = 1), icblc (CT = 1), dcbf, dcbi, mbar, msync, tlbsync, icbi) based on ABE. ABE must be set to
allow management of external L2 caches.
0 Address broadcasting disabled
1 Address broadcasting enabled
Reserved, should be cleared.
Figure 6-34. L1 Cache Control and Status Register 0 (L1CSR0)
—
Table 6-19. HID1 Field Descriptions (continued)
Table 6-20. L1CSR0 Field Descriptions
46
CPE CPI
47
48
All zeros
49
Description
—
Description
51
CSLC CUL CLO CLFR
52
Line Locking Bits
53
54
55
Access: Supervisor read/write
56
Freescale Semiconductor
—
61
CFI CE
62
63