R5S72011 RENESAS [Renesas Technology Corp], R5S72011 Datasheet - Page 7

no-image

R5S72011

Manufacturer Part Number
R5S72011
Description
32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7200 Series
Manufacturer
RENESAS [Renesas Technology Corp]
Datasheet
• Description of Numbers and Symbols
Aspects of the notations for register names, bit names, numbers, and symbolic names in this
manual are explained below.
(1) Overall notation
(2) Register notation
(3) Number notation
(4) Notation for active-low
Note: The bit names and sentences in the above figure are examples and do not refer to
In descriptions involving the names of bits and bit fields within this manual, the modules and
registers to which the bits belong may be clarified by giving the names in the forms
"module name"."register name"."bit name" or "register name"."bit name".
The style "register name"_"instance number" is used in cases where there is more than one
instance of the same function or similar functions.
[Example] CMCSR_0: Indicates the CMCSR register for the compare-match timer of channel 0.
Binary numbers are given as B'nnnn (B' may be omitted if the number is obviously binary),
hexadecimal numbers are given as H'nnnn or 0xnnnn, and decimal numbers are given as nnnn.
[Examples] Binary:
An overbar on the name indicates that a signal or pin is active-low.
[Example] WDTOVF
14.2.2 Compare Match Control/Status Register_0, _1 (CMCSR_0, CMCSR_1)
14.3 Operation
14.3.1 Interval Count Operation
When an internal clock is selected with the CKS1 and CKS0 bits in CMCSR and the STR bit in
CMSTR is set to 1, CMCNT starts incrementing using the selected clock. When the values in
CMCNT and the compare match constant register (CMCOR) match, CMCNT is cleared to H'0000
and the CMF flag in CMCSR is set to 1. When the CKS1 and CKS0 bits are set to B'01 at this time,
a f/4 clock is selected.
specific data in this manual.
CMCSR indicates compare match generation, enables or disables interrupts, and selects the counter
input clock. Generation of a WDTOVF signal or interrupt initializes the TCNT value to 0.
Hexadecimal: H'EFA0 or 0xEFA0
Decimal:
B'11 or 11
1234
(4)
(2)
Rev. 2.00 Sep. 07, 2007 Page vii of xxviii
Rev. 0.50, 10/04, page 416 of 914
(3)

Related parts for R5S72011