R0K572030S000BE Renesas Electronics America, R0K572030S000BE Datasheet - Page 972

Manufacturer Part Number

R0K572030S000BE

KIT DEV FOR SH7203

Manufacturer

Renesas Electronics America

Renesas Starter Kits (RSK)r

CPU Board, LCD Module, E10A-Lite Emulator, Cable, QuickStart Guide and CD-ROM

Silicon Manufacturer

Kit Contents

Silicon Family Name

Silicon Core Number

R5S72030W200FP

Tool / Board Applications

General Purpose MCU, MPU, DSP, DSC

Mcu Supported Families

Lead Free Status / RoHS Status

Contains lead / RoHS non-compliant

For Use With/related Products

Lead Free Status / Rohs Status

Section 19 Controller Area Network (RCAN-TL1)

Bit 7 — Auto-wake Mode (MCR7): MCR7 enables or disables the Auto-wake mode. If this bit is

set, the RCAN-TL1 automatically cancels the sleep mode (MCR5) by detecting CAN bus activity

(dominant bit). If MCR7 is cleared the RCAN-TL1 does not automatically cancel the sleep mode.

RCAN-TL1 cannot store the message that wakes it up.

Note: This bit can be modified only Reset or Halt mode.

Bit 6 — Halt during Bus Off (MCR6): MCR6 enables or disables entering Halt mode

immediately when MCR1 is set during Bus Off. This bit can be modified only in Reset or Halt

mode. Please note that when Halt is entered in Bus Off the CAN engine is also recovering

immediately to Error Active mode.

Rev. 3.00 Sep. 28, 2009 Page 940 of 1650

REJ09B0313-0300

Auto-wake by CAN bus activity disabled (Initial value)

Auto-wake by CAN bus activity enabled

If MCR[1] is set, RCAN-TL1 will not enter Halt mode during Bus Off but wait

up to end of recovery sequence (Initial value)

Enter Halt mode immediately during Bus Off if MCR[1] or MCR[14] are

Write Error Counter

Normal Mode (initial value)

Listen-Only Mode (Receive-Only Mode)

Self Test Mode 1 (External)

Self Test Mode 2 (Internal)

Error Passive Mode

Setting prohibited