R0K572030S000BE Renesas Electronics America, R0K572030S000BE Datasheet - Page 662

Manufacturer Part Number

R0K572030S000BE

KIT DEV FOR SH7203

Manufacturer

Renesas Electronics America

Renesas Starter Kits (RSK)r

CPU Board, LCD Module, E10A-Lite Emulator, Cable, QuickStart Guide and CD-ROM

Silicon Manufacturer

Kit Contents

Silicon Family Name

Silicon Core Number

R5S72030W200FP

Tool / Board Applications

General Purpose MCU, MPU, DSP, DSC

Mcu Supported Families

Lead Free Status / RoHS Status

Contains lead / RoHS non-compliant

For Use With/related Products

Lead Free Status / Rohs Status

Section 11 Multi-Function Timer Pulse Unit 2 (MTU2)

The MTU2 has the following six operating modes. Waveform output is possible in all of these

• Normal mode (channels 0 to 4)

• PWM mode 1 (channels 0 to 4)

• PWM mode 2 (channels 0 to 2)

• Phase counting modes 1 to 4 (channels 1 and 2)

• Complementary PWM mode (channels 3 and 4)

• Reset-synchronized PWM mode (channels 3 and 4)

The MTU2 output pin initialization method for each of these modes is described in this section.

The MTU2 output pins (TIOC*) are initialized low by a reset and in standby mode. Since MTU2

pin function selection is performed by the pin function controller (PFC), when the PFC is set, the

MTU2 pin states at that point are output to the ports. When MTU2 output is selected by the PFC

immediately after a reset, the MTU2 output initial level, low, is output directly at the port. When

the active level is low, the system will operate at this point, and therefore the PFC setting should

be made after initialization of the MTU2 output pins is completed.

Note: Channel number and port notation are substituted for *.

Rev. 3.00 Sep. 28, 2009 Page 630 of 1650

REJ09B0313-0300

MTU2 Output Pin Initialization

Operating Modes

Reset Start Operation