R0K572030S000BE Renesas Electronics America, R0K572030S000BE Datasheet - Page 577

• Manufacturer Part Number: R0K572030S000BE
• Description: KIT DEV FOR SH7203
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: MCUr

Specifications of R0K572030S000BE

• Contents: CPU Board, LCD Module, E10A-Lite Emulator, Cable, QuickStart Guide and CD-ROM
• Silicon Manufacturer: Renesas
• Kit Contents: Board
• Silicon Family Name: SH7203
• Silicon Core Number: R5S72030W200FP
• Tool / Board Applications: General Purpose MCU, MPU, DSP, DSC
• Mcu Supported Families: SH7203
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: SH7203
• Lead Free Status / Rohs Status: Compliant

11.4.6
In phase counting mode, the phase difference between two external clock inputs is detected and
TCNT is incremented/decremented accordingly. This mode can be set for channels 1 and 2.
When phase counting mode is set, an external clock is selected as the counter input clock and
TCNT operates as an up/down-counter regardless of the setting of bits TPSC0 to TPSC2 and bits
CKEG0 and CKEG1 in TCR. However, the functions of bits CCLR0 and CCLR1 in TCR, and of
TIOR, TIER, and TGR, are valid, and input capture/compare match and interrupt functions can be
used.
This can be used for two-phase encoder pulse input.
If overflow occurs when TCNT is counting up, the TCFV flag in TSR is set; if underflow occurs
when TCNT is counting down, the TCFU flag is set.
The TCFD bit in TSR is the count direction flag. Reading the TCFD flag reveals whether TCNT is
counting up or down.
Table 11.45 shows the correspondence between external clock pins and channels.
Table 11.45 Phase Counting Mode Clock Input Pins
(1)
Figure 11.29 shows an example of the phase counting mode setting procedure.
Channels
When channel 1 is set to phase counting mode
When channel 2 is set to phase counting mode
Example of Phase Counting Mode Setting Procedure
Phase Counting Mode
Figure 11.29 Example of Phase Counting Mode Setting Procedure
<Phase counting mode>
Select phase counting
Phase counting mode
Start count
mode
[1]
[2]
[1] Select phase counting mode with bits
[2] Set the CST bit in TSTR to 1 to start
Section 11 Multi-Function Timer Pulse Unit 2 (MTU2)
MD3 to MD0 in TMDR.
the count operation.
A-Phase
TCLKA
TCLKC
Rev. 3.00 Sep. 28, 2009 Page 545 of 1650
External Clock Pins
B-Phase
TCLKB
TCLKD
REJ09B0313-0300