R0K572030S000BE Renesas Electronics America, R0K572030S000BE Datasheet - Page 310

• Manufacturer Part Number: R0K572030S000BE
• Description: KIT DEV FOR SH7203
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: MCUr

Specifications of R0K572030S000BE

• Contents: CPU Board, LCD Module, E10A-Lite Emulator, Cable, QuickStart Guide and CD-ROM
• Silicon Manufacturer: Renesas
• Kit Contents: Board
• Silicon Family Name: SH7203
• Silicon Core Number: R5S72030W200FP
• Tool / Board Applications: General Purpose MCU, MPU, DSP, DSC
• Mcu Supported Families: SH7203
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: SH7203
• Lead Free Status / Rohs Status: Compliant

Section 9 Bus State Controller (BSC)
Rev. 3.00 Sep. 28, 2009 Page 278 of 1650
REJ09B0313-0300
Bit
4, 3
2
Bit Name
TRWL[1:0]*
⎯
Initial
Value
00
0
R/W
R
R/W
Description
Number of Auto-Precharge Startup Wait Cycles
Specify the number of minimum auto-precharge
startup wait cycles as shown below.
•
•
The setting for areas 2 and 3 is common.
00: No cycle
01: 1 cycle
10: 2 cycles
11: 3 cycles
Reserved
This bit is always read as 0. The write value should
always be 0.
Cycle number from the issuance of the WRITA
command by this LSI until the completion of auto-
precharge in the SDRAM.
Equivalent to the cycle number from the issuance
of the WRITA command until the issuance of the
ACTV command. Confirm that how many cycles
are required between the WRITE command receive
in the SDRAM and the auto-precharge activation,
referring to each SDRAM data sheet. And set the
cycle number so as not to exceed the cycle number
specified by this bit.
Cycle number from the issuance of the WRITA
command until the issuance of the PRE command.
This is the case when accessing another low
address in the same bank in bank active mode.