R0K572030S000BE Renesas Electronics America, R0K572030S000BE Datasheet - Page 749

• Manufacturer Part Number: R0K572030S000BE
• Description: KIT DEV FOR SH7203
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: MCUr

Specifications of R0K572030S000BE

• Contents: CPU Board, LCD Module, E10A-Lite Emulator, Cable, QuickStart Guide and CD-ROM
• Silicon Manufacturer: Renesas
• Kit Contents: Board
• Silicon Family Name: SH7203
• Silicon Core Number: R5S72030W200FP
• Tool / Board Applications: General Purpose MCU, MPU, DSP, DSC
• Mcu Supported Families: SH7203
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: SH7203
• Lead Free Status / Rohs Status: Compliant

14.4.4
Figure 14.4 shows how to use the alarm function.
Alarms can be generated using seconds, minutes, hours, day of the week, date, month, year, or any
combination of these. Set the ENB bit in the register on which the alarm is placed to 1, and then
set the alarm time in the lower bits. Clear the ENB bit in the register on which the alarm is not
placed to 0.
When the clock and alarm times match, 1 is set in the AF bit in RCR1. Alarm detection can be
checked by reading this bit, but normally it is done by interrupt. If 1 is set in the AIE bit in RCR1,
an interrupt is generated when an alarm occurs.
The alarm flag is set when the clock and alarm times match. However, the alarm flag can be
cleared by writing 0.
Alarm Function
Disable alarm interrupt
Enable alarm interrupt
(wait for interrupt or
Monitor alarm time
check alarm flag)
Clear alarm flag
Set alarm time
Clock running
Figure 14.4 Using Alarm Function
Write 0 to AIE in RCR1
to prevent errorneous interrupt
Always clear, since the flag may have been
set while the alarm time was being set.
Write 1 to AIE in RCR1
Rev. 3.00 Sep. 28, 2009 Page 717 of 1650
Section 14 Realtime Clock (RTC)
REJ09B0313-0300