R0K572030S000BE Renesas Electronics America, R0K572030S000BE Datasheet - Page 1436

• Manufacturer Part Number: R0K572030S000BE
• Description: KIT DEV FOR SH7203
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: MCUr

Specifications of R0K572030S000BE

• Contents: CPU Board, LCD Module, E10A-Lite Emulator, Cable, QuickStart Guide and CD-ROM
• Silicon Manufacturer: Renesas
• Kit Contents: Board
• Silicon Family Name: SH7203
• Silicon Core Number: R5S72030W200FP
• Tool / Board Applications: General Purpose MCU, MPU, DSP, DSC
• Mcu Supported Families: SH7203
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: SH7203
• Lead Free Status / Rohs Status: Compliant

Section 28 Power-Down Modes
Rev. 3.00 Sep. 28, 2009 Page 1404 of 1650
REJ09B0313-0300
Bit
7
6
5
4, 3
2
Bit Name
HIZ
—
MSTP35
—
MSTP32
Initial
Value
0
1
1
All 1
1
R/W
R/W
R
R/W
R
R/W
Description
Port High Impedance
Selects whether the state of specific output pin is
This bit must not be set while the TME bit in WTSCR
0: The pin state is retained in software standby mode
1: The pin is set to high-impedance in software
Reserved
This bit is always read as 1. The write value should
always be 1.
Module Stop 35
When the MSTP35 bit is set to 1, the supply of the
clock to the MTU2 is halted.
0: MTU2 runs.
1: Clock supply to MTU2 is halted.
Reserved
These bits are always read as 1. The write value
should always be 1.
Module Stop 32
When the MSTP32 bit is set to 1, the supply of the
clock to the ADC is halted.
0: ADC runs.
1: Clock supply to ADC is halted.
retained or high impedance in software standby mode
or deep standby mode. As to which pins are
controlled, see appendix A, Pin States.
of the WDT is 1. To set the output pin to high-
impedance, set the HIZ bit to 1 only while the TME bit
is 0.
or deep standby mode.
standby mode or deep standby mode.