R0K572030S000BE Renesas Electronics America, R0K572030S000BE Datasheet - Page 920

• Manufacturer Part Number: R0K572030S000BE
• Description: KIT DEV FOR SH7203
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: MCUr

Specifications of R0K572030S000BE

• Contents: CPU Board, LCD Module, E10A-Lite Emulator, Cable, QuickStart Guide and CD-ROM
• Silicon Manufacturer: Renesas
• Kit Contents: Board
• Silicon Family Name: SH7203
• Silicon Core Number: R5S72030W200FP
• Tool / Board Applications: General Purpose MCU, MPU, DSP, DSC
• Mcu Supported Families: SH7203
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: SH7203
• Lead Free Status / Rohs Status: Compliant

Section 18 Serial Sound Interface (SSI)
Rev. 3.00 Sep. 28, 2009 Page 888 of 1650
REJ09B0313-0300
Bit
26
25
Bit Name
OIRQ
IIRQ
Initial
Value
0
1
R/W
R/W*
R
Description
Overflow Error Interrupt Status Flag
This status flag indicates that data was supplied at a
higher rate than was required.
In either case this bit is set to 1 regardless of the value
of the OIEN bit and can be cleared by writing 0 to this
bit.
If OIRQ = 1 and OIEN = 1, an interrupt occurs.
•
•
Idle Mode Interrupt Status Flag
This interrupt status flag indicates whether the SSI
module is in idle state.
This bit is set regardless of the value of the IIEN bit to
allow polling.
The interrupt can be masked by clearing IIEN, but
cannot be cleared by writing to this bit.
If IIRQ = 1 and IIEN = 1, an interrupt occurs.
0: The SSI module is not in idle state.
1: The SSI module is in idle state.
TRMD = 0 (Receive mode)
If OIRQ = 1, SSIRDR was not read before there
was new unread data written to it. This will lead to
the loss of a sample and a potential corruption of
multi-channel data.
Note: When an overflow error occurs, the current
TRMD = 1 (Transmit mode)
If OIRQ = 1, SSITDR had data written to it before it
was transferred to the shift register. This will lead to
the loss of a sample and a potential corruption of
multi-channel data.
data in the data buffer of this module is
overwritten by the next incoming data from
the SSI interface.