MPC8536E-ANDROID Freescale Semiconductor, MPC8536E-ANDROID Datasheet - Page 1331

• Manufacturer Part Number: MPC8536E-ANDROID
• Description: HARDWARE/SOFTWARE ANDROID OS
• Manufacturer: Freescale Semiconductor
• Series: PowerQUICC ™r
• Type: MPUr

Specifications of MPC8536E-ANDROID

• Contents: Board
• For Use With/related Products: MPC8536
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Freescale Semiconductor
CMD20
CMD21–23
CMD24
CMD25
CMD26
CMD27
CMD28
CMD29
CMD30
CMD31
CMD32
CMD33
CMD34
CMD35
INDEX
CMD
Type
adtc
adtc
adtc
adtc
adtc
adtc
ac
ac
ac
ac
ac
ac
[31:0] data address
[31:0] stuff bits
[31:0] stuff bits
[31:0] write protect
data address
[31:0] data address
[31:0] data address
[31:0] data address
[31:0] data address
[31:0] data address
[31:0] data address
[31:0] data address
[31:0] data address
MPC8536E PowerQUICC III Integrated Processor Reference Manual, Rev. 1
Argument
Table 20-27. Commands for MMC/SD (continued)
Resp
R1b
R1b
R1
R1
R1
R1
R1
R1
R1
R1
R1
R1
WRITE_DAT_UNTIL_STOP
WRITE_MULTIPLE_BLOCK Continuously writes blocks of data until
PROGRAM_CSD
SET_WRITE_PROT
CLR_WRITE_PROT
TAG_SECTOR_START
TAG_SECTOR_END
UNTAG_SECTOR
TAG_ERASE_GROUP_STA
RT
WRITE_BLOCK
PROGRAM_CID
SEND_WRITE_PROT
Abbreviation
Reserved
Reserved
Writes data stream from the host
starting at the given address until the
STOP_TRANSMISION command is
received.
Writes a block of the size selected by
the SET_BLOCKLEN command.
the STOP_TRANSMISSION command
is received.
Programming of the card identification
register. This command should be
issued only once per card. The card
contains hardware to prevent this
operation after the first programming.
Normally this command is reserved for
the manufacturer.
Programming of the programmable bits
of the CSD.
If the card has write-protection
features, this command sets the write
protection bit of the addressed group.
The properties of write protection are
coded in the card-specific data
(WP_GRP_SIZE).
If the card provides write-protection
features, this command clears the write
protection bit of the addressed group.
If the card provides write-protection
features, this command asks the card
to send the status of the
write-protection bits.
Sets the address of the first sector of
the erase group.
Sets the address of the last write block
of the continuous range to be erased.
Removes one previously selected
sector from the erase selection.
Sets the address of the first erase
group within a range to be selected for
erase.
Enhanced Secure Digital Host Controller
Description
1
20-57