MPC555CME Freescale Semiconductor, MPC555CME Datasheet - Page 83

• Manufacturer Part Number: MPC555CME
• Description: KIT EVALUATION FOR MPC555
• Manufacturer: Freescale Semiconductor
• Type: Microcontrollerr

Specifications of MPC555CME

• Contents: Module Board, Installation Guide, Power Supply, Cable, Software and more
• Processor To Be Evaluated: MPC555
• Data Bus Width: 32 bit
• Interface Type: RS-232
• For Use With/related Products: MPC555
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.3.5.3 AN[1]/ANX/PQB[1]_[A:B]
2.3.5.4 AN[2]/ANY/PQB[2]_[A:B]
2.3.5.5 AN[3]/ANZ/PQB[3]_[A:B]
2.3.5.6 AN[48:51]/PQB[4:7]_[A:B]
MPC555
USER’S MANUAL
Port (PQB0) – Input-only port. This is a 5-V input. This path is synchronized in the pad.
The input is level-shifted before it is sent internally to the QADC.
Pin Name: a_an1_anx_pqb1 (1 pin for first QADC), b_an1_anx_pqb1 (1 pin for sec-
ond QADC)
Analog Channel (AN1) – Internally multiplexed input-only analog channels. Passed
on as a separate signal to the QADC.
Multiplexed Analog Input (ANX) – Externally multiplexed analog input.
Port (PQB1) – Input-only port. This is a 5-V input. This path is synchronized in the pad.
The input is level-shifted before being sent internally to the QADC.
Pin Name: a_an2_any_pqb2 (1 pin for first QADC), b_an2_any_pqb2 (1 pin for sec-
ond QADC)
Analog Channel (AN2) – Internally multiplexed input-only analog channel. The input
is passed on as a separate signal to the QADC.
Multiplexed Analog Input (ANY) – Externally multiplexed analog input.
Port (PQB2) – Input-only port. This is a 5-V input. This path is synchronized in the pad.
The input is level-shifted before it is sent internally to the QADC.
Pin Name: a_an3_anz_pqb3 (1 pin for first QADC), b_an3_anz_pqb3 (1 pin for sec-
ond QADC)
Analog Input (AN3) – Internally multiplexed input-only analog channel. The input is
passed on as a separate signal to the QADC.
Multiplexed Analog Input (ANZ) – Externally multiplexed analog input.
Port (PQB3) – Input-only port. This is a 5-V input. This path is synchronized in the pad.
The input is level-shifted before it is sent internally to the QADC.
Pin Name: a_an48_pqb4 – a_an51_pqb7 (4 pins for first QADC), b_an48_pqb4 –
b_an51_pqb7 (4 pins for second QADC).
Analog Input (AN[48:51]) – Analog input channel. The input is passed on as a sepa-
rate signal to the QADC.
Port (PQB[4:7]) – Input-only port. Has a synchronizer with an input enable and clock.
The input is level-shifted before it is sent internally to the QADC.
/
MPC556
SIGNAL DESCRIPTIONS
Rev. 15 October 2000
MOTOROLA
2-25