HD64F3026X25 Renesas Electronics America, HD64F3026X25 Datasheet - Page 375

• Manufacturer Part Number: HD64F3026X25
• Description: MCU 3V 256K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD64F3026X25

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

10.4
10.4.1
TP
timer, or address bus output is enabled, the corresponding pins cannot be used for TPC output. The
data transfer from NDR bits to DR bits takes place, however, regardless of the usage of the pin.
Pin functions should be changed only under conditions in which the output trigger event will not
occur.
10.4.2
During non-overlapping operation, the transfer of NDR bit values to DR bits takes place as
follows.
1. NDR bits are always transferred to DR bits at compare match A.
2. At compare match B, NDR bits are transferred only if their value is 0. Bits are not transferred
Figure 10.9 illustrates the non-overlapping TPC output operation.
0
if their value is 1.
to TP
TPC output pin
15
Usage Notes
Operation of TPC Output Pins
Note on Non-Overlapping Output
are multiplexed with 16-bit timer, address bus, and other pin functions. When 16-bit
DDR
Figure 10.9 Non-Overlapping TPC Output
Q
Section 10 Programmable Timing Pattern Controller (TPC)
Q
NDER
Q
DR
C
D
Rev. 2.00 Sep 20, 2005 page 335 of 800
Compare match A
Compare match B
Q
NDR
REJ09B0260-0200
D