MK30DN512ZVLK10 Freescale Semiconductor, MK30DN512ZVLK10 Datasheet - Page 625

• Manufacturer Part Number: MK30DN512ZVLK10
• Description: ARM Microcontrollers - MCU KINETIS 512K SLCD
• Manufacturer: Freescale Semiconductor

Specifications of MK30DN512ZVLK10

• Core: ARM Cortex M4
• Processor Series: K30
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 50 MHz
• Program Memory Size: 512 KB
• Data Ram Size: 128 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 1.71 V to 3.6 V
• Operating Temperature Range: - 40 C to + 105 C
• Package / Case: LQFP-80
• Mounting Style: SMD/SMT

After clearing CCIF to launch the Read Once command, a 4-byte Read Once record is
read from the program flash IFR and stored in the FCCOB register. The CCIF flag is set
after the Read Once operation completes. Valid record index values for the Read Once
command range from 0x00 to 0x0F. During execution of the Read Once command, any
attempt to read addresses within the program flash block containing this 64-byte field
returns invalid data. The Read Once command can be executed any number of times.
28.4.10.11 Program Once Command
The Program Once command enables programming to a reserved 64-byte field in the
program flash 0 IFR (see
the Program Once field is via 16 records, each 4 bytes long. The Program Once field can
be read using the Read Once command (see
Resource command (see
programmed only once since the program flash 0 IFR cannot be erased.
Freescale Semiconductor, Inc.
Command not available in current mode/security
An invalid record index is supplied
Error Condition
FCCOB Number
FCCOB Number
4
5
6
7
0
1
2
3
4
5
6
Table 28-50. Read Once Command FCCOB Requirements (continued)
Table 28-52. Program Once Command FCCOB Requirements
Table 28-51. Read Once Command Error Handling
K30 Sub-Family Reference Manual, Rev. 6, Nov 2011
Read Resource
Program Flash IFR Map
Table continues on the next page...
Returned Values
Program Once record index (0x00 - 0x0F)
Command). Each Program Once record can be
Program Once Byte 0 value
Program Once Byte 1 value
Program Once Byte 2 value
Read Once
Read Once byte 0 value
Read Once byte 1 value
Read Once byte 2 value
Read Once byte 3 value
FCCOB Contents [7:0]
FCCOB Contents [7:0]
0x43 (PGMONCE)
and
Not Used
Not Used
Program Once
Command) or using the Read
Chapter 28 Flash Memory Module (FTFL)
Field). Access to
FSTAT[ACCERR]
FSTAT[ACCERR]
Error Bit
625