MK30DN512ZVLK10 Freescale Semiconductor, MK30DN512ZVLK10 Datasheet - Page 1306

no-image

MK30DN512ZVLK10

Manufacturer Part Number
MK30DN512ZVLK10
Description
ARM Microcontrollers - MCU KINETIS 512K SLCD
Manufacturer
Freescale Semiconductor
Datasheet

Specifications of MK30DN512ZVLK10

Core
ARM Cortex M4
Processor Series
K30
Data Bus Width
32 bit
Maximum Clock Frequency
50 MHz
Program Memory Size
512 KB
Data Ram Size
128 KB
On-chip Adc
Yes
Operating Supply Voltage
1.71 V to 3.6 V
Operating Temperature Range
- 40 C to + 105 C
Package / Case
LQFP-80
Mounting Style
SMD/SMT

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MK30DN512ZVLK10
Manufacturer:
Freescale Semiconductor
Quantity:
10 000
Functional description
45.5.2.4.3 ADMA error
The ADMA stops whenever any error is encountered. These errors include:
ADMA descriptor error will be generated when it fails to detect 'valid' flag in the
descriptor. If ADMA descriptor error occurs, the interrupt is not generated even if the
'interrupt' flag of this descriptor is set.
When XFERTYP[BCEN] bit is set, data length set in buffer must equal to the whole data
length set in descriptor nodes, otherwise data length mismatch error will be generated.
If XFERTYP[BCEN] bit is not set, the whole data length set in descriptor should be
times of block length, otherwise, when all data set in the descriptor nodes are done not at
block boundary, the data mismatch error will occur.
45.5.3 SD protocol unit
The SD protocol unit deals with all SD protocol affairs.
The SD Protocol Unit performs the following functions:
The SD protocol unit consists of four sub modules:
1306
1. SD transceiver.
• Fetching descriptor error
• Transfer error
• Data length mismatch error
• Acts as the bridge between the internal buffer and the SD bus
• Sends the command data as well as its argument serially
• Stores the serial response bit stream into corresponding registers
• Detects the bus state on the DAT[0] line
• Monitors the interrupt from the SDIO card
• Asserts the read wait signal
• Gates off the SD clock when buffer is announcing danger status
• Detects the write protect state
K30 Sub-Family Reference Manual, Rev. 6, Nov 2011
Freescale Semiconductor, Inc.

Related parts for MK30DN512ZVLK10