MK30DN512ZVLK10 Freescale Semiconductor, MK30DN512ZVLK10 Datasheet - Page 593

• Manufacturer Part Number: MK30DN512ZVLK10
• Description: ARM Microcontrollers - MCU KINETIS 512K SLCD
• Manufacturer: Freescale Semiconductor

Specifications of MK30DN512ZVLK10

• Core: ARM Cortex M4
• Processor Series: K30
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 50 MHz
• Program Memory Size: 512 KB
• Data Ram Size: 128 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 1.71 V to 3.6 V
• Operating Temperature Range: - 40 C to + 105 C
• Package / Case: LQFP-80
• Mounting Style: SMD/SMT

28.3 Memory Map and Registers
This section describes the memory map and registers for the FTFL module. Data read
from unimplemented memory space in the FTFL module is undefined. Writes to
unimplemented or reserved memory space (registers) in the FTFL module are ignored.
28.3.1 Flash Configuration Field Description
The program flash memory contains a 16-byte flash configuration field that stores default
protection settings (loaded on reset) and security information that allows the MCU to
restrict access to the FTFL module.
28.3.2 Program Flash IFR Map
The program flash IFR is nonvolatile information memory that can be read freely, but the
user has no erase and limited program capabilities (see the Read Once, Program Once,
and Read Resource commands in
Read Resource
following table and further described in the subsequent paragraphs.
For devices that only contain program flash, the program flash IFR is located within the
program flash 0 memory block.
Freescale Semiconductor, Inc.
0x0_0400 - 0x0_0407
0x0_0408 - 0x0_040B
0x0_040F
0x0_040E
0x0_040D
0x0_040C
Flash Configuration Field Byte
Address
Command). The contents of the program flash IFR are summarized in the
K30 Sub-Family Reference Manual, Rev. 6, Nov 2011
8
4
1
1
1
1
Size (Bytes)
Read Once
Command,
Program Once Command
Chapter 28 Flash Memory Module (FTFL)
Backdoor Comparison Key. Refer to
Verify Backdoor Access Key Command
and
Backdoor Key
Program flash protection bytes. Refer to
the description of the Program Flash
Protection Registers (FPROT0-3).
Program flash only devices: Reserved
Program flash only devices: Reserved
Flash nonvolatile option byte. Refer to
the description of the Flash Option
Register (FOPT).
Flash security byte. Refer to the
description of the Flash Security
Register (FSEC).
Field Description
Unsecuring the Chip Using
Access.
and
593