HD6417727F100CV Renesas Electronics America, HD6417727F100CV Datasheet - Page 943

• Manufacturer Part Number: HD6417727F100CV
• Description: SH3-DSP, LEAD FREE
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417727F100CV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 100MHz
• Connectivity: FIFO, SCI, SIO, SmartCard, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 104
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.6 V ~ 2.05 V
• Data Converters: A/D 6x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 240-QFP Exposed Pad, 240-eQFP, 240-HQFP
• Cpu Family: SuperH
• Device Core Size: 32b
• Frequency (max): 100MHz
• Interface Type: SCI/USB
• Program Memory Size: Not Required
• Total Internal Ram Size: 16KB
• # I/os (max): 104
• Number Of Timers - General Purpose: 4
• Operating Supply Voltage (typ): 1.8/3.3V
• Operating Supply Voltage (max): 2.05/3.6V
• Operating Supply Voltage (min): 1.6/2.6V
• On-chip Adc: 6-chx10-bit
• On-chip Dac: 2-chx8-bit
• Instruction Set Architecture: RISC
• Operating Temp Range: -20C to 75C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 240
• Package Type: HQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Compliant

30.1
The PC card controller (PCC) controls the external buffer, interrupts, and exclusive ports of the
PC card interface to be connected to the SH7727. Using the PCC enables two slots of PC cards
that conform to the PCMCIA Rev. 2.1/JEIDA Ver. 4.2 standard to be easily connected to the
SH7727.
30.1.1
The PCC has the following features:
• As a PC card interface to be connected to physical area 6, an IC memory card interface and an
• Outputs control signals for the external buffer (PCC0DRV).
• Supports a preemptive operating system by switching attribute memory, common memory, and
• Provides a segment bit (an address bit for the PC card) for common memory, enabling access
• Disables the PCC operation and supports only a bus interface of a PC card interface which is
• When the PCC is enabled (P0USE bit in PCC0GCR set to 1), PCC0WAIT functions as a
I/O card interface are supported.
I/O space by using addresses.
to a 64-MB space fully conforming to PCMCIA specifications.
same as the SH7709/SH7729 Series (by using the P0USE bit of PCC0GCR).
WAIT signal in the same manner as WAIT.
Overview
Features
Section 30 PC Card Controller (PCC)
Rev.6.00 Mar. 27, 2009 Page 885 of 1036
Section 30 PC Card Controller (PCC)
REJ09B0254-0600