HD6417727F100CV Renesas Electronics America, HD6417727F100CV Datasheet - Page 138

• Manufacturer Part Number: HD6417727F100CV
• Description: SH3-DSP, LEAD FREE
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417727F100CV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 100MHz
• Connectivity: FIFO, SCI, SIO, SmartCard, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 104
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.6 V ~ 2.05 V
• Data Converters: A/D 6x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 240-QFP Exposed Pad, 240-eQFP, 240-HQFP
• Cpu Family: SuperH
• Device Core Size: 32b
• Frequency (max): 100MHz
• Interface Type: SCI/USB
• Program Memory Size: Not Required
• Total Internal Ram Size: 16KB
• # I/os (max): 104
• Number Of Timers - General Purpose: 4
• Operating Supply Voltage (typ): 1.8/3.3V
• Operating Supply Voltage (max): 2.05/3.6V
• Operating Supply Voltage (min): 1.6/2.6V
• On-chip Adc: 6-chx10-bit
• On-chip Dac: 2-chx8-bit
• Instruction Set Architecture: RISC
• Operating Temp Range: -20C to 75C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 240
• Package Type: HQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Compliant

Section 2 CPU
2.6.2
Added CPU System Control Instructions
The new instructions in this class are treated as part of the CPU core functions, and therefore all
the added instructions have a 16-bit code length. All the additional instructions belong to the
system control instruction group. Table 2.26 summarizes the added system instructions. New
control registers—RS, RE, and MOD—have been added to the CPU core to support loop control
and modulo addressing functions, and LDC and STS type instructions have been provided for
these registers.
The DSP engine’s DSR, A0, X0, X1, Y0, and Y1 registers are treated as system registers such as
MACH and MACL, and therefore STS and LDS instructions are supported for these registers. As
digital signal processing operations usually employ a multi-level nested-loop structure, DSP
performance can be improved by means of a zero-overhead loop control function. SETRC type
instructions are provided to set the repeat count in the RC field in SR[27:16]. When an immediate
operand type SETRC instruction is executed, the 8-bit immediate operand data is set in SR[23:16],
and 0 is set in the remaining bits, SR[27:24]. When a register operand type SETRC instruction is
executed, Rn[11:0] is set in SR[27:16]. The start address and end address of the repeat loop are set
in the RS register and RE register. There are two ways of setting the addresses: by using an LDC
type instruction, or by using the LDRS and LDRE instructions.
Rev.6.00 Mar. 27, 2009 Page 80 of 1036
REJ09B0254-0600