HD6417727F100CV Renesas Electronics America, HD6417727F100CV Datasheet - Page 108

• Manufacturer Part Number: HD6417727F100CV
• Description: SH3-DSP, LEAD FREE
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417727F100CV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 100MHz
• Connectivity: FIFO, SCI, SIO, SmartCard, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 104
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.6 V ~ 2.05 V
• Data Converters: A/D 6x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 240-QFP Exposed Pad, 240-eQFP, 240-HQFP
• Cpu Family: SuperH
• Device Core Size: 32b
• Frequency (max): 100MHz
• Interface Type: SCI/USB
• Program Memory Size: Not Required
• Total Internal Ram Size: 16KB
• # I/os (max): 104
• Number Of Timers - General Purpose: 4
• Operating Supply Voltage (typ): 1.8/3.3V
• Operating Supply Voltage (max): 2.05/3.6V
• Operating Supply Voltage (min): 1.6/2.6V
• On-chip Adc: 6-chx10-bit
• On-chip Dac: 2-chx8-bit
• Instruction Set Architecture: RISC
• Operating Temp Range: -20C to 75C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 240
• Package Type: HQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Compliant

Section 2 CPU
Single Data Addressing: DSP instructions include two single data transfer instructions
(MOVS.W, MOVS.L) that load data into, or store data from, a DSP register. With these
instructions, one of registers R2 to R5 is used as the single data transfer address register (As).
The following four kinds of addressing can be used with single data transfer instructions.
1. Non-update address register addressing:
2. Addition index register addressing:
3. Increment address register addressing:
4. Decrement address register addressing:
The R8 register is the index register (Is) for the address pointer (As). Single data transfer
addressing is shown in figure 2.13.
Rev.6.00 Mar. 27, 2009 Page 50 of 1036
REJ09B0254-0600
The As register is an address pointer. It is not updated.
The As register is an address pointer. After a data transfer, the value of the Is register is added
to the As register (post-increment).
The As register is an address pointer. After a data transfer, the As register is incremented by 2
or 4 (post-increment).
The As register is an address pointer. Before a data transfer, –2 or –4 is added to the As
register (i.e. 2 or 4 is subtracted) (pre-decrement).
−2/−4 (DEC)
+2/+4 (INC)
+0 (no update)
Note: Four address processing methods:
Figure 2.13 Single Data Transfer Addressing
1. No update
2. Index register addition (Is)
3. Increment
4. Decrement
31
R8[Is]
ALU
0
31
R2[As]
R3[As]
R4[As]
R5[As]
Post-increment
Pre-decrement
0
MAB
31
0
CAB