HD6417727F100CV Renesas Electronics America, HD6417727F100CV Datasheet - Page 940

• Manufacturer Part Number: HD6417727F100CV
• Description: SH3-DSP, LEAD FREE
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417727F100CV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 100MHz
• Connectivity: FIFO, SCI, SIO, SmartCard, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 104
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.6 V ~ 2.05 V
• Data Converters: A/D 6x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 240-QFP Exposed Pad, 240-eQFP, 240-HQFP
• Cpu Family: SuperH
• Device Core Size: 32b
• Frequency (max): 100MHz
• Interface Type: SCI/USB
• Program Memory Size: Not Required
• Total Internal Ram Size: 16KB
• # I/os (max): 104
• Number Of Timers - General Purpose: 4
• Operating Supply Voltage (typ): 1.8/3.3V
• Operating Supply Voltage (max): 2.05/3.6V
• Operating Supply Voltage (min): 1.6/2.6V
• On-chip Adc: 6-chx10-bit
• On-chip Dac: 2-chx8-bit
• Instruction Set Architecture: RISC
• Operating Temp Range: -20C to 75C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 240
• Package Type: HQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Compliant

Section 29 D/A Converter
Bit 5—D/A Enable (DAE): Controls D/A conversion, together with bits DAOE0 and DAOE1.
When the DAE bit is cleared to 0, D/A conversion is controlled independently in channels 0 and 1.
When this LSI enters standby mode while D/A conversion is enabled, the D/A output is held and
the analog power-supply current is equivalent to that during D/A conversion. To reduce the analog
power-supply current in standby mode, clear the DAOE0 and DAOE1 bits and disable the D/A
output.
Bit 7: DAOE1
0
0
0
1
1
1
When the DAE bit is set to 1, even if bits DAOE0 and DAOE1 in DACR and the ADST bit in
ADCSR are cleared to 0, the same current is drawn from the analog power supply as during A/D
and D/A conversion.
Bits 4 to 0—Reserved: Read-only bits, always read as 1.
Rev.6.00 Mar. 27, 2009 Page 882 of 1036
REJ09B0254-0600
Bit 6: DAOE0
0
1
1
0
0
1
Bit 5: DAE
—
0
1
0
1
—
Description
D/A conversion is disabled in channels 0 and 1
(Initial value)
D/A conversion is enabled in channel 0
D/A conversion is disabled in channel 1
D/A conversion is enabled in channels 0 and 1
D/A conversion is disabled in channel 0
D/A conversion is enabled in channel 1
D/A conversion is enabled in channels 0 and 1
D/A conversion is enabled in channels 0 and 1