NH82801FBM S L89K Intel, NH82801FBM S L89K Datasheet - Page 204

• Manufacturer Part Number: NH82801FBM S L89K
• Manufacturer: Intel

Specifications of NH82801FBM S L89K

• Lead Free Status / RoHS Status: Compliant

Functional Description
5.20.7
5.20.7.1
5.20.7.2
5.20.7.3
204
Pause Feature
USB 2.0 Power Management
This feature allows platforms (especially mobile systems) to dynamically enter low-power states
during brief periods when the system is idle (i.e., between keystrokes). This is useful for enabling
power management features like Intel SpeedStep technology in the ICH6. The policies for entering
these states typically are based on the recent history of system bus activity to incrementally enter
deeper power management states. Normally, when the EHC is enabled, it regularly accesses main
memory while traversing the DMA schedules looking for work to do; this activity is viewed by the
power management software as a non-idle system, thus preventing the power managed states to be
entered. Suspending all of the enabled ports can prevent the memory accesses from occurring, but
there is an inherent latency overhead with entering and exiting the suspended state on the USB
ports that makes this unacceptable for the purpose of dynamic power management. As a result, the
EHCI software drivers are allowed to pause the EHC’s DMA engines when it knows that the traffic
patterns of the attached devices can afford the delay. The pause only prevents the EHC from
generating memory accesses; the SOF packets continue to be generated on the USB ports (unlike
the suspended state).
Suspend Feature
The Enhanced Host Controller Interface (EHCI) For Universal Serial Bus Specification,
Section 4.3 describes the details of Port Suspend and Resume.
ACPI Device States
The USB 2.0 function only supports the D0 and D3 PCI Power Management states. Notes
regarding the ICH6 implementation of the Device States:
1. The EHC hardware does not inherently consume any more power when it is in the D0 state
2. In the D0 state, all implemented EHC features are enabled.
3. In the D3 state, accesses to the EHC memory-mapped I/O range will master abort. Note that,
4. In the D3 state, the EHC interrupt must never assert for any reason. The internal PME# signal
5. When the Device Power State field is written to D0 from D3, an internal reset is generated. See
6. Attempts to write any other value into the Device Power State field other than 00b (D0 state)
than it does in the D3 state. However, software is required to suspend or disable all ports prior
to entering the D3 state such that the maximum power consumption is reduced.
since the Debug Port uses the same memory range, the Debug Port is only operational when
the EHC is in the D0 state.
is used to signal wake events, etc.
section EHC Resets for general rules on the effects of this reset.
and 11b (D3 state) will complete normally without changing the current value in this field.
Intel
®
I/O Controller Hub 6 (ICH6) Family Datasheet