DS72011RB120FPV Renesas Electronics America, DS72011RB120FPV Datasheet - Page 546

• Manufacturer Part Number: DS72011RB120FPV
• Description: IC SH7201 MPU ROMLESS 176LQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7200r

Specifications of DS72011RB120FPV

• Core Size: 32-Bit
• Core Processor: SH-2A
• Speed: 120MHz
• Connectivity: CAN, EBI/EMI, FIFO, I²C, SCI, Serial Sound
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 104
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 70°C
• Package / Case: 176-LQFP
• No. Of I/o's: 109
• Ram Memory Size: 32KB
• Cpu Speed: 120MHz
• Digital Ic Case Style: LQFP
• Supply Voltage Range: 3V To 3.6V
• Operating Temperature Range: -20°C To +70°C
• Embedded Interface Type: I2C, SSI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: R0K572011S000BE - KIT STARTER FOR SH7201HS0005KCU11H - EMULATOR E10A-USB H8S(X),SH2(A)
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Section 12 Multi-Function Timer Pulse Unit 2 (MTU2)
(3)
Interrupts TGIA_3 (at the crest) and TCIV_4 (at the trough) in channels 3 and 4 can be skipped up
to seven times by making settings in the timer interrupt skipping set register (TITCR).
Transfers from a buffer register to a temporary register or a compare register can be skipped in
coordination with interrupt skipping by making settings in the timer buffer transfer register
(TBTER). For the linkage with buffer registers, refer to description (c), Buffer Transfer Control
Linked with Interrupt Skipping, below.
A/D converter start requests generated by the A/D converter start request delaying function can
also be skipped in coordination with interrupt skipping by making settings in the timer A/D
converter request control register (TADCR). For the linkage with the A/D converter start request
delaying function, refer to section 12.4.9, A/D Converter Start Request Delaying Function.
The setting of the timer interrupt skipping setting register (TITCR) must be done while the
TGIA_3 and TCIV_4 interrupt requests are disabled by the settings of registers TIER_3 and
TIER_4 along with under the conditions in which TGFA_3 and TCFV_4 flag settings by compare
match never occur. Before changing the skipping count, be sure to clear the T3AEN and T4VEN
bits to 0 to clear the skipping counter.
(a)
Figure 12.67 shows an example of the interrupt skipping operation setting procedure. Figure 12.68
shows the periods during which interrupt skipping count can be changed.
Page 518 of 1190
Interrupt Skipping in Complementary PWM Mode:
Example of Interrupt Skipping Operation Setting Procedure
Figure 12.67 Example of Interrupt Skipping Operation Setting Procedure
Note:
Clear interrupt skipping counter
enable interrupt skipping
Set skipping count and
<Interrupt skipping>
The setting of TITCR must be done while the TGIA_3 and TCIV_4 interrupt requests are
disabled by the settings of registers TIER_3 and TIER_4 along with under the conditions
in which TGFA_3 and TCFV_4 flag settings by compare match never occur.
Before changing the skipping count, be sure to clear the T3AEN and T4VEN bits to 0 to
clear the skipping counter.
Interrupt skipping
[1]
[2]
[1] Set bits T3AEN and T4VEN in the timer interrupt
[2] Specify the interrupt skipping count within the
skipping set register (TITCR) to 0 to clear the
skipping counter.
range from 0 to 7 times in bits 3ACOR2 to
3ACOR0 and 4VCOR2 to 4VCOR0 in TITCR, and
enable interrupt skipping through bits T3AEN and
T4VEN.
R01UH0026EJ0300 Rev. 3.00
SH7201 Group
Sep 24, 2010