DS72011RB120FPV Renesas Electronics America, DS72011RB120FPV Datasheet - Page 389

• Manufacturer Part Number: DS72011RB120FPV
• Description: IC SH7201 MPU ROMLESS 176LQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7200r

Specifications of DS72011RB120FPV

• Core Size: 32-Bit
• Core Processor: SH-2A
• Speed: 120MHz
• Connectivity: CAN, EBI/EMI, FIFO, I²C, SCI, Serial Sound
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 104
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 70°C
• Package / Case: 176-LQFP
• No. Of I/o's: 109
• Ram Memory Size: 32KB
• Cpu Speed: 120MHz
• Digital Ic Case Style: LQFP
• Supply Voltage Range: 3V To 3.6V
• Operating Temperature Range: -20°C To +70°C
• Embedded Interface Type: I2C, SSI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: R0K572011S000BE - KIT STARTER FOR SH7201HS0005KCU11H - EMULATOR E10A-USB H8S(X),SH2(A)
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

SH7201 Group
11.10
Reloading can be set up for each transfer parameter (source address, destination address, or byte
count) of a channel through the setting of the individual reload function enable bits in the
corresponding DMA control register A (DMCNTAn). When the DMA transfer end condition is
detected, DMA transfer parameters specified for reloading are automatically reloaded.
(1)
If reloading is not in use, only place the data in the current register. When reloading is in use,
place data in both the reload and current registers.
Do not write to the current register during single operand transfer. If data is written to the register
during continuous operation, further operation is not guaranteed. Although the reload register can
be set during single operand transfer, ensure that this is not the last single operand transfer of a
DMA transfer. If the setting is executed after that point, the new setting may not be reloaded on
completion of the DMA transfer.
(2)
The reload function enables continuous transfer to dispersed areas.
Writing to the DMA reload source/destination address register (DMRSADRn/ DMRDADRn) or
the DMA reload byte count register (DMRBCTn) before the completion of transfer provides a
way of preparing the parameters for the next transfer without affecting the current DMA transfer
(current registers). This enables the use of a single channel for the continuous transfer of multiple
transfer blocks consisting of different numbers of bytes to and from different transfer areas over a
single channel.
Figure 11.13 shows an example of the transfer of blocks between dispersed areas with the aid of
the reload function.
R01UH0026EJ0300 Rev. 3.00
Sep 24, 2010
Reload and Current Registers
Continuous Transfer to Dispersed areas
Reload Function
Section 11 Direct Memory Access Controller (DMAC)
Page 361 of 1190