mpc823rg Freescale Semiconductor, Inc, mpc823rg Datasheet - Page 825

• Manufacturer Part Number: mpc823rg
• Description: Mpc823 Powerquicc Integrated Communications Processor For Portable Systems
• Manufacturer: Freescale Semiconductor, Inc

16.10.8.8 USB EVENT REGISTER. The 16-bit, memory-mapped USB event register
(USBER) is used to generate interrupt events and report events recognized by the USB
channel. When an event is recognized, the USB sets the corresponding bit in the USBER.
Interrupts generated by this register may be masked in the USB mask register. A bit is
cleared by writing a one (writing a zero has no effect) and more than one bit can be cleared
at a time. All unmasked bits must be cleared before the communication processor module
will clear the internal interrupt request.
Bits 0–5—Reserved
These bits are reserved and must be set to 0.
RESET—Reset Condition Detected
This bit indicates that the USB reset condition has been asserted.
IDLE—IDLE Status Changed
This bit indicates that a change in the status of the serial line was detected. The real time
idle status is reflected in the USB status register.
TXEx—TX Error 0–3
This bit indicates that an error occurred during transmission for endpoint x (packet not
acknowledged (function), NAK/STALL handshake received (host) or transmit underrun).
SOF—Start of Frame
This bit indicates that a start-of-frame packet was received. The packet is stored in the
FRAME_N parameter RAM entry.
BSY—Busy Condition
This bit indicates that received data has been discarded due to a lack of buffers. This bit is
set after the first character with no receive buffer is received.
TXB—TX Buffer
This bit indicates that a buffer has been transmitted. It is set once the transmit data of the
last character in the buffer was written to the transmit FIFO (the L bit in the TX buffer
descriptor is set to 0) or after the last character was transmitted on the line ( L is set to 1).
RXB—RX Buffer
This bit indicates that a buffer has been received. It is set after the last character has been
written to the receive buffer and the RX buffer descriptor is closed.
USBER
RESET
FIELD
ADDR
R/W
BIT
0
1
2
RESERVED
R/W
Freescale Semiconductor, Inc.
0
For More Information On This Product,
3
MPC823 REFERENCE MANUAL
4
Go to: www.freescale.com
5
RESET
R/W
6
0
(IMMR & 0
IDLE
R/W
7
0
x
FFFF0000) + 0
TXE3
R/W
8
0
x
A10
TXE2
R/W
9
0
Communication Processor Module
TXE1
R/W
10
0
TXE0
R/W
11
0
SOF
R/W
12
0
BSY
R/W
13
0
TXB
R/W
14
0
16-373
RXB
R/W
15
0