mpc823rg Freescale Semiconductor, Inc, mpc823rg Datasheet - Page 805

• Manufacturer Part Number: mpc823rg
• Description: Mpc823 Powerquicc Integrated Communications Processor For Portable Systems
• Manufacturer: Freescale Semiconductor, Inc

16.10.4.1 OUT TOKEN. When the USB controller receives an OUT token, data reception
begins. The USB controller fetches the next buffer descriptor associated with the endpoint
and if it is empty, it starts transferring the incoming packet to the buffer descriptor’s
associated data buffer. When the data buffer has been filled, the USB controller clears the
E bit in the RX buffer descriptor and generates an interrupt if the I bit in the buffer descriptor
is set. If the incoming packet exceeds the length of the data buffer, the USB controller
fetches the next buffer descriptor in the table and, if it is empty, continues transferring the
rest of the packet to this buffer descriptor’s associated buffer. Otherwise, if it is full, an error
occurs. The entire data packet, including the DATA0/DATA1 packet ID (PID), is written to
the receive buffers and the PID is reflected in the PID field of the receive buffer descriptor.
It is your responsibility to program the driver software to check data packet synchronization
by monitoring the DATA0/DATA1 PID sequence toggle.
If the packet was received error-free (no CRC errors and no bit stuff error), depending on
the endpoint transfer mode configuration, an ACK handshake will be transmitted to the host.
If a reception error occurred, no handshake packet is returned, and the error status bits will
be set in the last buffer descriptor associated with this packet. If the RHS field in the
endpoint’s configuration register is programmed to respond with NAK, a NAK handshake is
returned instead of ACK. If the RHS field is programmed to respond with STALL, a STALL
handshake is returned. In both cases, the buffer will receive the data packet if the buffer
descriptors are available.
DATA PACKET
CORRUPTED
Yes
No
No
No
No
Freescale Semiconductor, Inc.
Table 16-32. USB Out Token Reception
For More Information On This Product,
MPC823 REFERENCE MANUAL
Go to: www.freescale.com
RHS FIELD
00 (Normal)
11 (STALL)
01 (Ignore)
10 (NAK)
USEP
N/A
x
None (Data Discarded)
Communication Processor Module
SENT TO HOST
HANDSHAKE
STALL
None
ACK
NAK
16-353