pc87591l-n05 National Semiconductor Corporation, pc87591l-n05 Datasheet - Page 202

• Manufacturer Part Number: pc87591l-n05
• Description: Lpc Mobile Embedded Controller
• Manufacturer: National Semiconductor Corporation

www.national.com
4.0 Embedded Controller Modules
ACM Control and Status Register (ACMCTS)
This register controls the operation and indicates the status of the ACM module. ACMCTS is cleared (00
Location: 00 FD40
Type:
Bit
Name
Reset
7-4
Bit
0
1
2
3
R/W1C EOMEV (End-of-Measurement Event). End of voltage level measurement burst (for all eight inputs).
R/W1C EOCEV (End-of-Comparison Event). End of threshold comparison in Threshold Comparison Burst
R/W1C OVUNTHEV (Over/Under Threshold Event). At least one input is above (or below) the voltage
Type
Varies per bit
W
START (ACM Operation Start). Start trigger for the ACM operation in the mode selected by ACMMOD
field in ACMCNF register. If the new ACMMOD value differs from the value currently in use, all event
flags (EOMEV, EOCEV, OVUNTHEV) are cleared and operation in the new mode begins. Writing a 1 to
the START bit without modifying the ACMMODE value is ignored by the module.
0: No effect - (default)
1: Operation start trigger - automatically returns to 0 after start
The bit is set only when the ACM is in Voltage Level Burst mode (ACMMOD = 01
register).
0: Measurement in progress, or not in Voltage Level Burst mode (default)
1: End of voltage level measurement burst
mode (ACMMOD = 10
0: Comparison in progress, or not in Threshold Comparison Burst mode (default)
1: End of threshold comparison
threshold value. The bit is set only when the ACM is in Low Power Threshold Comparison mode
(ACMMOD = 11
0: No input above (or below) the threshold, or not in Low Power Threshold Comparison mode (default)
1: One or more inputs above (or below) the threshold
Reserved.
16
7
0
6
0
2
Reserved
in ACMCNF register).
2
in ACMCNF register).
5
0
(Continued)
202
4
0
Description
OVUNTHEV
3
0
EOCEV
2
0
EOMEV
1
0
2
in ACMCNF
16
) on reset.
START
0
0
Revision 1.2