R8A77800ANBGAV Renesas Electronics America, R8A77800ANBGAV Datasheet - Page 268

• Manufacturer Part Number: R8A77800ANBGAV
• Description: IC SUPERH MPU ROMLESS 449-BGA
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7780r

Specifications of R8A77800ANBGAV

• Core Processor: SH-4A
• Core Size: 32-Bit
• Speed: 400MHz
• Connectivity: Audio Codec, MMC, Serial Sound, SCI, SIO, SPI, SSI
• Peripherals: DMA, POR, WDT
• Number Of I /o: 75
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.15 V ~ 1.35 V
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 449-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

Section 8 Caches
8.6
To enable the IC and OC to be managed by software, the IC contents can be read from or written
to by a program in the P2 area by means of a MOV instruction in privileged mode. Operation is
not guaranteed if access is made from a program in another area. In this case, execute one of the
following three methods for executing a branch to the P0, U0, P1, or P3 area.
1. Execute a branch using the RTE instruction.
2. Execute a branch to the P0, U0, P1, or P3 area after executing the ICBI instruction for any
3. If the MC bit in IRMCR is 0 (initial value) before making an access to the memory-mapped
Note that the method 3 may not be guaranteed in the future SuperH Series. Therefore, it is
recommended that the method 1 or 2 should be used for being compatible with the future SuperH
Series.
In privileged mode, the OC contents can be read from or written to by a program in the P1 or P2
area by means of a MOV instruction. Operation is not guaranteed if access is made from a
program in another area. The IC and OC are allocated to the P4 area in the virtual address space.
Only data accesses can be used on both the IC address array and data array and the OC address
array and data array, and accesses are always longword-size. Instruction fetches cannot be
performed in these areas. For reserved bits, a write value of 0 should be specified and the read
value is undefined.
Rev.1.00 Dec. 13, 2005 Page 216 of 1286
REJ09B0158-0100
address (including non-cacheable area).
IC, the specific instruction does not need to be executed. However, note that the CPU
processing performance will be lowered because the instruction fetch is performed again for
the next instruction after making an access to the memory-mapped IC.
Memory-Mapped Cache Configuration