R4F24278NVFQU Renesas Electronics America, R4F24278NVFQU Datasheet - Page 411

• Manufacturer Part Number: R4F24278NVFQU
• Description: MCU 512K/48K 2.7-5.5V 144-LQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2400r

Specifications of R4F24278NVFQU

• Core Processor: H8S/2600
• Core Size: 16/32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, I²C, IrDA, SCI, Smart Card, SPI, SSU, UART/USART
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 98
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-LQFP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

H8S/2427, H8S/2427R, H8S/2425 Group
Figures 8.9 and 8.10 show an example of the setting procedure for repeat mode in common
register enabled mode and common register disabled mode, respectively.
REJ09B0565-0100 Rev. 1.00
Jul 22, 2010
Figure 8.9 Example of Repeat Mode Setting Procedure (Common Register Enabled Mode)
Set the number of transfers
and transfer destination
Repeat mode setting
Set transfer source
Read DMABCRL
Set MDLCFGCR
Set DMABCRH
Set DMABCRL
Set DMACRS
Repeat mode
Set DRSEL
addresses
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[1] Set the DMCOMMD bit in MDLCFGCR to 1.
[2] Set RSEL3, RSEL2, RSEL1, or RSEL0 bit in DRSEL to 1
[3] Set each bit in DMABCRH.
[4] Set the transfer source address and transfer destination
[5] Set the number of transfers in both ETCRH and ETCRL.
[6] Set each bit in DMACRS.
[7] Read the DTE bit in DMABCRL as 0.
[8] Set each bit in DMABCRL.
depending on the channel to be set. Here, set RSEL5 to 0
when channel 3 or 2 is to be set and set RSEL4 to 0 when
channel 1 or 0 is to be set.
address in MAR and IOAR.
•
•
• Specify enabling or disabling of internal interrupt
• Set the transfer data size with the DTSZ bit.
• Specify whether MAR is to be incremented or
• Set the MDS bit to 1.
• Specify the transfer direction with the DTDIR bit.
• Select the activation source with bits DTF3 to DTF0.
clearing with the DTA bit.
decremented with the DTID bit.
Clear the DTIE bit to 0.
Set the DTE bit to 1 to enable transfer.
Section 8 DMA Controller (DMAC)
Page 381 of 1448