AT32UC3A364-ALUT Atmel, AT32UC3A364-ALUT Datasheet - Page 661

• Manufacturer Part Number: AT32UC3A364-ALUT
• Description: IC MCU 64KB FLASH 144LQFP
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3A364-ALUT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: EBI/EMI, I²C, IrDA, MMC, SPI, SSC, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, POR, WDT
• Number Of I /o: 110
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Processor Series: AT32UC3x
• Core: AVR32
• Data Bus Width: 32 bit
• Data Ram Size: 96 KB
• Interface Type: IrDA/SCI/SCIF/UDI
• Maximum Clock Frequency: 66 MHz
• Number Of Timers: 3
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR32, EWAVR32-BL, KSK-EVK1100-PL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT, ATEXTWIFI, ATEVK1104
• Minimum Operating Temperature: - 40 C
• Controller Family/series: AT32UC3A
• No. Of I/o's: 110
• Ram Memory Size: 64KB
• Cpu Speed: 66MHz
• No. Of Timers: 2
• Rohs Compliant: Yes
• For Use With: ATEVK1104 - KIT DEV/EVAL FOR AVR32 AT32UC3AATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMRATEVK1100 - KIT DEV/EVAL FOR AVR32 AT32UC3A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

26.7.3.11
32072C–AVR32–2010/03
RXINI
FIFOCON
IN
Management of OUT pipes
(bank 0)
DATA
RXINI
FIFOCON
RXINI shall be cleared by software (by writing a one to the Received IN Data Interrupt Clear bit
in the Pipe n Control Clear register(UPCONnCLR.RXINIC)) to acknowledge the interrupt, what
has no effect on the pipe FIFO.
The user then reads from the FIFO and clears the FIFOCON bit (by writing a one to the FIFO
Control Clear (FIFOCONC) bit in UPCONnCLR) to free the bank. If the IN pipe is composed of
multiple banks, this also switches to the next bank. The RXINI and FIFOCON bits are updated in
accordance with the status of the next bank.
RXINI shall always be cleared before clearing FIFOCON.
The Read/Write Allowed (RWALL) bit in UPSTAn is set when the current bank is not empty, i.e.,
the software can read further data from the FIFO.
Figure 26-24. Example of an IN Pipe with 1 Data Bank
Figure 26-25. Example of an IN Pipe with 2 Data Banks
OUT packets are sent by the host. All the data can be written which acknowledges or not the
bank when it is full.
The pipe must be configured and unfrozen first.
The Transmitted OUT Data Interrupt (TXOUTI) bit in UPSTAn is set at the same time as FIFO-
CON when the current bank is free. This triggers a PnINT interrupt if the Transmitted OUT Data
Interrupt Enable (TXOUTE) bit in UPCONn is one.
IN
ACK
HW
(bank 0)
DATA
SW
read data from CPU
BANK 0
ACK
HW
SW
SW
read data from CPU
IN
BANK 0
IN
(bank 1)
DATA
(bank 0)
DATA
SW
AT32UC3A3/A4
ACK
HW
ACK
HW
read data from CPU
read data from CPU
SW
SW
BANK 1
BANK 0
661