AT32UC3A364-ALUT Atmel, AT32UC3A364-ALUT Datasheet - Page 526

• Manufacturer Part Number: AT32UC3A364-ALUT
• Description: IC MCU 64KB FLASH 144LQFP
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3A364-ALUT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: EBI/EMI, I²C, IrDA, MMC, SPI, SSC, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, POR, WDT
• Number Of I /o: 110
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Processor Series: AT32UC3x
• Core: AVR32
• Data Bus Width: 32 bit
• Data Ram Size: 96 KB
• Interface Type: IrDA/SCI/SCIF/UDI
• Maximum Clock Frequency: 66 MHz
• Number Of Timers: 3
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR32, EWAVR32-BL, KSK-EVK1100-PL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT, ATEXTWIFI, ATEVK1104
• Minimum Operating Temperature: - 40 C
• Controller Family/series: AT32UC3A
• No. Of I/o's: 110
• Ram Memory Size: 64KB
• Cpu Speed: 66MHz
• No. Of Timers: 2
• Rohs Compliant: Yes
• For Use With: ATEVK1104 - KIT DEV/EVAL FOR AVR32 AT32UC3AATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMRATEVK1100 - KIT DEV/EVAL FOR AVR32 AT32UC3A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

24.9.5
Name:
Access Type:
Offset:
Reset value:
• PERIOD: Transmit Period Divider Selection
• STTDLY: Transmit Start Delay
• START: Transmit Start Selection
32072C–AVR32–2010/03
31
23
15
7
-
START
Others
This field selects the divider to apply to the selected transmit clock in order to generate a periodic Frame Sync Signal.
If equal to zero, no signal is generated.
If not equal to zero, a signal is generated each 2 x (PERIOD+1) transmit clock periods.
If STTDLY is not zero, a delay of STTDLY clock cycles is inserted between the start event and the actual start of transmission.
When the transmitter is programmed to start synchronously with the receiver, the delay is also applied.
Note: STTDLY must be written carefully, in relation to Transmit Sync Data transmission.
0
1
2
3
4
5
6
7
Transmit Clock Mode Register
CKG
30
22
14
6
-
TCMR
Read/Write
0x18
0x00000000
Transmit Start
Continuous, as soon as a word is written to the THR Register (if Transmit is enabled), and
immediately after the end of transfer of the previous data.
Receive start
Detection of a low level on TX_FRAME_SYNC signal
Detection of a high level on TX_FRAME_SYNC signal
Detection of a falling edge on TX_FRAME_SYNC signal
Detection of a rising edge on TX_FRAME_SYNC signal
Detection of any level change on TX_FRAME_SYNC signal
Detection of any edge on TX_FRAME_SYNC signal
Reserved
CKI
29
21
13
5
-
28
20
12
4
-
PERIOD
STTDLY
CKO
27
19
11
3
26
18
10
2
START
AT32UC3A3/A4
25
17
9
1
CKS
24
16
8
0
526