AT32UC3A364-ALUT Atmel, AT32UC3A364-ALUT Datasheet - Page 583

• Manufacturer Part Number: AT32UC3A364-ALUT
• Description: IC MCU 64KB FLASH 144LQFP
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3A364-ALUT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: EBI/EMI, I²C, IrDA, MMC, SPI, SSC, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, POR, WDT
• Number Of I /o: 110
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Processor Series: AT32UC3x
• Core: AVR32
• Data Bus Width: 32 bit
• Data Ram Size: 96 KB
• Interface Type: IrDA/SCI/SCIF/UDI
• Maximum Clock Frequency: 66 MHz
• Number Of Timers: 3
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR32, EWAVR32-BL, KSK-EVK1100-PL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT, ATEXTWIFI, ATEVK1104
• Minimum Operating Temperature: - 40 C
• Controller Family/series: AT32UC3A
• No. Of I/o's: 110
• Ram Memory Size: 64KB
• Cpu Speed: 66MHz
• No. Of Timers: 2
• Rohs Compliant: Yes
• For Use With: ATEVK1104 - KIT DEV/EVAL FOR AVR32 AT32UC3AATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMRATEVK1100 - KIT DEV/EVAL FOR AVR32 AT32UC3A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

25.6.9.6
Figure 25-40. Header Reception
25.6.9.7
32072C–AVR32–2010/03
With RSTSTA=1
Write US_CR
Baud Rate
US_LINIR
Clock
LINID
RXD
Header Reception (Slave Node Configuration)
Slave Node Synchronization
All the LIN Frames start with a header which is sent by the master node and consists of a Synch
Break Field, Synch Field and Identifier Field.
In Slave node configuration, the frame handling starts with the reception of the header.
The USART uses a break detection threshold of 11 nominal bit times at the actual baud rate. At
any time, if 11 consecutive recessive bits are detected on the bus, the USART detects a Break
Field. As long as a Break Field has not been detected, the USART stays idle and the received
data are not taken in account.
When a Break Field has been detected, the USART expects the Synch Field character to be
0x55. This field is used to update the actual baud rate in order to stay synchronized (see
25.6.9.7). If the received Synch character is not 0x55, an Inconsistent Synch Field error is gen-
erated (see
After receiving the Synch Field, the USART expects to receive the Identifier Field.
When the Identifier has been received, the flag LINID is set to “1”. At this moment the field
IDCHR in the LIN Identifier register (LINIR) is updated with the received character. The Identifier
parity bits can be automatically computed and checked (see
The synchronization is done only in Slave node configuration. The procedure is based on time
measurement between falling edges of the Synch Field. The falling edges are available in dis-
tances of 2, 4, 6 and 8 bit times.
Figure 25-41. Synch Field
The time measurement is made by a 19-bit counter clocked by the sampling clock (see
25.6.1).
13 dominant bits (at 0)
Break Field
Section
1 recessive bit
25.6.10).
Start
Delimiter
Break
bit
(at 1)
2 Tbit
Start
Bit
1
2 Tbit
0
Synch Byte = 0x55
1
8 Tbit
0
Synch Field
1
0
2 Tbit
1
0
Stop
Bit
Start
Bit
2 Tbit
ID0 ID1 ID2
Section
AT32UC3A3/A4
ID3
25.6.9.8).
ID4
Stop
bit
ID5
ID6
ID7
Stop
Bit
Section
Section
583