UPD78F1174AGF-GAT-AX Renesas Electronics America, UPD78F1174AGF-GAT-AX Datasheet - Page 750

• Manufacturer Part Number: UPD78F1174AGF-GAT-AX
• Description: MCU 16BIT 78K0R/KX3 128-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Kx3r

Specifications of UPD78F1174AGF-GAT-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, EBI/EMI, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 111
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 16x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

25.6.3 Selecting communication mode
Notes 1. Selection items for Standard settings on GUI of the flash memory programmer.
25.6.4 Communication commands
sent from the flash memory programmer to the 78K0R/KH3 are called commands, and the signals sent from the
78K0R/KH3 to the dedicated flash memory programmer are called response.
issued from the programmer and the 78K0R/KH3 perform processing corresponding to the respective commands.
748
Communication mode of the 78K0R/KH3 as follows.
The 78K0R/KH3 communicates with the dedicated flash memory programmer by using commands. The signals
The flash memory control commands of the 78K0R/KH3 are listed in the table below. All these commands are
2. Because factors other than the baud rate error, such as the signal waveform slew, also affect UART
communication, thoroughly evaluate the slew as well as the baud rate error.
Table 25-3. Relationship Between FLMD0 Pin and Operation Mode After Reset Release
1-line mode
(single-line
UART)
Communication
Mode
PG-FP5, FL-PR5 QB-MINI2
UART
FLMD0
V
memory programmer
0
DD
Dedicated flash
PG-FP4, FL-PR4
Port
Figure 25-9. Communication Commands
Cxxxxxx
Axxxx
Bxxxxx
Table 25-4. Communication Modes
PG-FP4
CHAPTER 25 FLASH MEMORY
STATVE
User’s Manual U18432EJ5V0UD
Normal operation mode
Flash memory programming mode
115,200 bps,
250,000 bps,
500,000 bps,
1 Mbps
Speed
Standard Setting
Note 2
Command
Response
Operation Mode
Frequency
Note 1
−
78K0R/KH3
Multiply Rate
−
TOOL0
Pins Used