UPD78F1174AGF-GAT-AX Renesas Electronics America, UPD78F1174AGF-GAT-AX Datasheet - Page 503

• Manufacturer Part Number: UPD78F1174AGF-GAT-AX
• Description: MCU 16BIT 78K0R/KX3 128-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Kx3r

Specifications of UPD78F1174AGF-GAT-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, EBI/EMI, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 111
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 16x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

(2) Operation procedure
Caution
After setting the PER0 register to 1, be sure to set the SPSm register after 4 or more clocks
have elapsed.
Changing setting of SOLm register
Changing setting of SOEm register
Setting SMRmn register
Setting SCRmn register
Setting SDRmn register
Starting communication
Writing to SSm register
Setting SPSm register
Setting PER0 register
Starting initial setting
Setting SOm register
Figure 13-72. Initial Setting Procedure for UART Transmission
Setting port
CHAPTER 13 SERIAL ARRAY UNIT
User’s Manual U18432EJ5V0UD
Release the serial array unit from the
reset status and start clock supply.
Enable data output of the target channel
by setting a port register and a port mode
register.
Set the operation clock.
Set an operation mode, etc.
Set a communication format.
Set a transfer baud rate.
Set an output data level.
Manipulate the SOmn bit and set an
initial output level.
Set the SOEmn bit to 1 and enable data
output of the target channel.
SEmn = 1 when the SSmn bit of the
target channel is set to 1.
Set transmit data to the T
7 to 0 of the SDRmn register) and start
communication.
X
Dq register (bits
501