UPD78F1174AGF-GAT-AX Renesas Electronics America, UPD78F1174AGF-GAT-AX Datasheet - Page 281

• Manufacturer Part Number: UPD78F1174AGF-GAT-AX
• Description: MCU 16BIT 78K0R/KX3 128-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Kx3r

Specifications of UPD78F1174AGF-GAT-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, EBI/EMI, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 111
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 16x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

(3) Operation of TOmn pin in combination-operation mode (TOMmn = 1)
(b) When operation starts with TOMmn = 1 setting (Combination-operation mode (PWM output))
(a) When TOLmn setting has been changed during timer operation
Remarks 1. Set:
Remarks 1. Set:
When TOMmn = 1, the active level is determined by TOLmn setting.
When the TOLmn setting has been changed during timer operation, the setting becomes valid at the
generation timing of TOmn change condition. Rewriting TOLmn does not change the output level of TOmn.
The following figure shows the operation when the value of TOLmn has been changed during timer
operation (TOMmn = 1).
Figure 7-30. Operation when TOLmn Has Been Changed during Timer Operation
Default level, TOLmn setting
2. m: Unit number (m = 0, 1), n: Channel number (n = 0 to 7),
2. m: Unit number (m = 0, 1), n: Channel number (n = 0 to 7),
Internal reset signal
Internal set signal
TOmn = 0, TOLmn = 0
TOmn = 1, TOLmn = 0
TOmn = 0, TOLmn = 1
TOmn = 1, TOLmn = 1
Reset:
mn = 00 to 07, 10 to 13
Reset:
mn = 00 to 07, 10 to 13
Figure 7-29. TOmn Pin Output Status at PWM Output (TOMmn = 1)
TOmn pin
(Active high)
(Active high)
TOLmn
(Active low)
(Active low)
The output signal of TOmn pin changes from active level to inactive level.
The output signal of TOmn pin changes from active level to inactive level.
The output signal of TOmn pin changes from inactive level to active level.
The output signal of TOmn pin changes from inactive level to active level.
TOEmn
Port output is enabled
Dependent on TOmn setting
CHAPTER 7 TIMER ARRAY UNIT
Hi-Z
Hi-Z
Hi-Z
Hi-Z
User’s Manual U18432EJ5V0UD
TOmn does not change
Set
No change
Reset
TOmn pin transition
Dependent on TOLmn setting
Set/reset signals are inverted
Set
Reset
Set
279