UPD78F1174AGF-GAT-AX Renesas Electronics America, UPD78F1174AGF-GAT-AX Datasheet - Page 47

• Manufacturer Part Number: UPD78F1174AGF-GAT-AX
• Description: MCU 16BIT 78K0R/KX3 128-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Kx3r

Specifications of UPD78F1174AGF-GAT-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, EBI/EMI, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 111
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 16x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

(1) Port mode
(2) Control mode
2.2.14 P140 to P145 (port 14)
input, clock/buzzer output, serial interface data I/O, and clock I/O.
using port input mode register 14 (PIM14).
tolerance) in 1-bit units using port output mode register 14 (POM14).
(1) Port mode
(2) Control mode
P140 to P145 function as a 6-bit I/O port. P140 P145 pins also function as timer I/O, external interrupt request
Input to the P142 and P143 pins can be specified through a normal input buffer or a TTL input buffer in 1-bit units
Output from the P142 to P144 pins can be specified as normal CMOS output or N-ch open-drain output (V
The following operation modes can be specified in 1-bit units.
P130 functions as a 1-bit output port.
P131 functions as a 1-bit I/O port. P131 can be set to input or output port in 1-bit units using port mode register
13 (PM13). Use of an on-chip pull-up resistor can be specified by pull-up resistor option register 13 (PU13).
P131 functions as timer I/O.
(a) TI06
(b) TO06
P140 to P145 function as a 6-bit I/O port. P140 to P145 can be set to input or output port in 1-bit units using port
mode register 14 (PM14). Use of an on-chip pull-up resistor can be specified by pull-up resistor option register 14
(PU14).
P140 to P145 function as timer I/O, external interrupt request input, clock/buzzer output, serial interface data I/O,
and clock I/O.
(a) INTP6, INTP7
(b) PCLBUZ0, PCLBUZ1
(c) TI07
(d) TO07
(e) SI20
This is a pin for inputting an external count clock/capture trigger to 16-bit timer 06.
This is a timer output pin from 16-bit timer 06.
These are the external interrupt request input pins for which the valid edge (rising edge, falling edge, or both
rising and falling edges) can be specified.
These are the clock/buzzer output pins.
This is a pin for inputting an external count clock/capture trigger to 16-bit timer 07.
This is a timer output pin of 16-bit timer 07.
This is a serial data input pin of serial interface CSI20.
CHAPTER 2 PIN FUNCTIONS
User’s Manual U18432EJ5V0UD
45
DD