DF70845AD80FPV Renesas Electronics America, DF70845AD80FPV Datasheet - Page 499

• Manufacturer Part Number: DF70845AD80FPV
• Description: IC SUPERH MCU FLASH 112LQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7080r

Specifications of DF70845AD80FPV

• Core Size: 32-Bit
• Program Memory Size: 512KB (512K x 8)
• Core Processor: SH-2
• Speed: 80MHz
• Connectivity: EBI/EMI, FIFO, I²C, SCI, SSU
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 76
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• No. Of I/o's: 76
• Ram Memory Size: 32KB
• Cpu Speed: 80MHz
• Digital Ic Case Style: LQFP
• Supply Voltage Range: 3V To 3.6V, 4.5V To 5.5V
• Embedded Interface Type: I2C, SCI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: R0K570865S001BE - KIT STARTER FOR SH7086R0K570865S000BE - KIT STARTER FOR SH7086HS0005KCU11H - EMULATOR E10A-USB H8S(X),SH2(A)
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Bit
5
4
3 to 0
Bit Name
BFB
BFA
MD[3:0]
Initial
Value
0
0
0000
R/W
R/W
R/W
R/W
Description
Buffer Operation B
Specifies whether TGRB is to operate in the normal
way, or TGRB and TGRD are to be used together for
buffer operation. When TGRD is used as a buffer
register, TGRD input capture/output compare do not
take place in modes other than complementary PWM
mode, but compare match with TGRD occurs in
complementary PWM mode. Since the TGFD flag will
be set if a compare match occurs during Tb interval in
complementary PWM mode, the TGIED bit in timer
interrupt enable register 3/4 (TIER_3/4) should be
cleared to 0.
In channels 1 and 2, which have no TGRD, bit 5 is
reserved. It is always read as 0 and cannot be modified.
0: TGRB and TGRD operate normally
1: TGRB and TGRD used together for buffer operation
Buffer Operation A
Specifies whether TGRA is to operate in the normal
way, or TGRA and TGRC are to be used together for
buffer operation. When TGRC is used as a buffer
register, TGRC input capture/output compare do not
take place in modes other than complementary PWM
mode, but compare match with TGRC occurs in
complementary PWM mode. Since the TGFC flag will
be set if a compare match occurs on channel 4 during
Tb interval in complementary PWM mode, the TGIEC
bit in timer interrupt enable register 4 (TIER_4) should
be cleared to 0.
In channels 1 and 2, which have no TGRC, bit 4 is
reserved. It is always read as 0 and cannot be modified.
0: TGRA and TGRC operate normally
1: TGRA and TGRC used together for buffer operation
Modes 0 to 3
These bits are used to set the timer operating mode.
See table 11.11 for details.
Section 11 Multi-Function Timer Pulse Unit 2 (MTU2)
Rev. 3.00 May 17, 2007 Page 441 of 1582
REJ09B0181-0300