TMP93xy20FG Toshiba, TMP93xy20FG Datasheet - Page 69

• Manufacturer Part Number: TMP93xy20FG
• Manufacturer: Toshiba

Specifications of TMP93xy20FG

• Package: LQFP144
• Rom Types(m=mask,p=otp, F=flash,e=eeprom): M/P
• Rom Combinations: 64
• Ram Combinations: 2
• Architecture: 16-bit CISC
• Usb/spi Channels: -
• Uart/sio Channels: 2
• I2c/sio Bus Channels: 1
• (s)dram Controller: -
• Adc 10-bit Channel: 8
• Da Converter: -
• Timer 8-bit Channel: 4
• Timer 16-bit Channel: 4
• Pwm 8-bit Channels: -
• Pwm 16-bit Channels: -
• Cs/wait Controller: -
• Dual Clock: Y
• Number Of I/o Ports: 88
• Power Supply Voltage(v): 4.5 to 5.5

3.5.7
Port 6 (P60 to P67)
serial bus interface I/O signals, 8-bit timer I/O signals. and external interrupt INT7 input
signals. Setting 1 in the appropriate bit of the port 6 function register P6FC enables each
functions.
open-drain output mode. (P6FC<P61F, P62F> = 11)
0, and sets all bits of the port 6 as an input port.
(1) Port 60, 65 (SCK,
Port 60 to 65 are 8-bit general-purpose I/O ports. I/O can be set on a bit basis.
In addition to functioning as general-purpose I/O ports, port 60 to 65 also function as
To use P61 and P62 as serial bus interface I/O pins (I
Resetting sets all bits of the output latch P6 to 1, initializes all bits of P6CR and P6FC to
when the serial bus interface is in the SIO mode. Port 65 is used as a
the serial channel 0, or a SCLK I/O pin.
In addition to functioning as an I/O port, port 60 also functions as a SCK I/O pins
SCK, SCLK0
Direction control
Function control
(on bit basis)
(on bit basis)
Output latch
P6CR write
P6 read
P6FC write
P6 write
Reset
S
Figure 3.5.16 Port 6 (P60 and P65)
SCLK0
CTS0
CTS0
SCK
/SCLK0)
93CS20-67
A
B
Selector
Selector
S
S
B
A
2
C bus mode), set these ports to
P60 (SCK)
P65 (SCLK0/
CTS
TMP93CS20
2004-02-10
input pin of
CTS0
)