TMP93xy20FG Toshiba, TMP93xy20FG Datasheet - Page 3

• Manufacturer Part Number: TMP93xy20FG
• Manufacturer: Toshiba

Specifications of TMP93xy20FG

• Package: LQFP144
• Rom Types(m=mask,p=otp, F=flash,e=eeprom): M/P
• Rom Combinations: 64
• Ram Combinations: 2
• Architecture: 16-bit CISC
• Usb/spi Channels: -
• Uart/sio Channels: 2
• I2c/sio Bus Channels: 1
• (s)dram Controller: -
• Adc 10-bit Channel: 8
• Da Converter: -
• Timer 8-bit Channel: 4
• Timer 16-bit Channel: 4
• Pwm 8-bit Channels: -
• Pwm 16-bit Channels: -
• Cs/wait Controller: -
• Dual Clock: Y
• Number Of I/o Ports: 88
• Power Supply Voltage(v): 4.5 to 5.5

1.
• The information contained herein is subject to change without notice.
• The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general
• The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal
• The products described in this document are subject to the foreign exchange and foreign trade laws.
• TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law
• For a discussion of how the reliability of microcontrollers can be predicted, please refer to Section 1.3 of the chapter entitled Quality
TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by
implication or otherwise under any patent or patent rights of TOSHIBA or others.
can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer,
when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid
situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to
property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most
recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for
Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc..
equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are
neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunctionor
failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control
instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made
at the customer’s own risk.
and regulations.
and Reliability Assurance/Handling Precautions.
Outline and Device Characteristics
low-power-consumption operation.
(1) Original 16-bit CPU (900/L CPU)
(2) Minimum instruction execution time: 200 ns at 20 MHz
(3) Internal RAM: 2 Kbytes
(4) LCD driver
(5) Timer for realtime clock: 1 channel
(6) 8-bit timer: 4 channels
(7) 16-bit timer: 4 channels
The TMP93CS20 is high-speed, advanced 16-bit microcontroller. It enables low-voltage and
The TMP93CS20 is housed in 144-pin flat packages.
The device characteristics are as follows:
Purchase of TOSHIBA I
these components in an I
Specification as defined by Philips.
•
•
•
•
•
Internal ROM: 64 Kbytes
•
•
•
Low Voltage/Low Power
TLCS-90 instruction mnemonic upward compatible
16-Mbyte linear address space
General-purpose registers, register bank system
16-bit multiplication, 16-bit division, bit transfer and bit manipulation instructions
Micro DMA: 4 channels (1.6 µs per 2 bytes at 20 MHz)
Boosting circuit (Reference voltage external input)
Maximum 40 segments × 4 commons
1/4, 1/3, 1/2 duty, static driving selection
2
C components conveys a license under the Philips I
CMOS 16-Bit Microcontroller
2
C system, provided that the system conforms to the I
TMP93CS20F
93CS20-1
2
C Patent Rights to use
TMP93CS20
2
C Standard
2004-02-10
030619EBP1