tmxf28155 ETC-unknow, tmxf28155 Datasheet - Page 326

• Manufacturer Part Number: tmxf28155
• Description: Tmxf28155 Super Mapper 155/51 Mbits/s Sonet/sdh X28/x21 Ds1/e1
• Manufacturer: ETC-unknow

155/51 Mbits/s SONET/SDH x28/x21 DS1/E1
13 Cross Connect (XC) Registers
Table 461. XC2_TPM_SRC, XC2 Test-Pattern Monitor Source Configuration (R/W)
Table 462. XC_MISC, XC Global Register 2 (R/W)
Table 463. XC3_TPM_SRC, XC3 Test-Pattern Monitor Source Configuration (R/W)
326
Address
0x500D3 15:8
Address
0x500A8
Address
0x500C0 15:6
Bit
6:5
4:0
15:8
Bit
7:0
Bit
7
5
4
3
2
1
0
XC3_TSOURCE_ID[1:0] TPG/TPM DS3 Source. Source identifier for TPM DS3 test
XC2_TSOURCE_ID[7:0] XC2 TPM Source Connection. Source2 identifier for TPM
XC_RSTS1_TUG3
XC_TSTS1_TUG3
XC_DS2ALCOEN
XC_DS1ALCOEN
XC_RPOAC_EN
XC_TPOAC_EN
Name
Name
Name
—
—
—
—
—
Reserved.
M23 DS2 Clock Out. Setting this bit to 1 enables DS2 low
clock-out mode from M23. Setting this bit to 0 selects the nor-
mal DS2 clock and data input mode.
M12/M13 DS1 Clock Out. Setting this bit to 1 enables DS1
low clock-out mode from M12/M13. Setting this bit to 0 selects
the normal DS1 clock and data input mode.
Receive POAC Enable. Setting this bit to 1 enables RPOAC
channel output and 0 to disable.
Transmit POAC Enable. Setting this bit to 1 enables TPOAC
channel output and 0 to disable.
Receive POAC Channel Select. Selector for TMUX (logic 1)/
SPEMPR (logic 0) receive POAC channel.
Transmit POAC Channel Select. Selector for TMUX (logic 1)/
SPEMPR (logic 0) transmit POAC channel.
Reserved.
Reserved. Must write to 0.
data.
00 = TPM receives DS3 from external pins.
01 = TPG and TPM are connected to M13 through NSMI
10 = TPM receives DS3 from SPE.
11 = Reserved.
Reserved. Must write to 0.
Reserved.
DS2 test data. When external I/O is selected
(SOURCE2_BLOCK = 11), CHANNEL2_ID can range
from 1 to 29.
(continued)
interface.
Function
Function
Function
Agere Systems Inc.
May 2001
Default
(invalid)
Default
Default
0x0000
0x0000
Reset
Reset
Reset
0
0
0
0
0
0
0