HD64F3029XBL25V Renesas Electronics America, HD64F3029XBL25V Datasheet - Page 687

• Manufacturer Part Number: HD64F3029XBL25V
• Description: MCU 5V 512K,PB-FREE 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD64F3029XBL25V

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Response
Error
response
Note: * This error does not occur with this LSI.
Rev. 2.0, 06/04, page 658 of 980
Multiplication ratio 2 (1 byte) : The value of multiplication or division ratios for the
peripheral frequency
SUM (1 byte) : Checksum
Response, H'06, (1 byte) : Response to selection of a new bit rate
When it is possible to set the bit rate, the response will be ACK.
Error response, H'BF, (1 byte) : Error response to selection of new bit rate
ERROR : (1 byte) : Error code
H'11
H'24
H'25
H'26
H'27
Multiplication ratio (1 byte) : The value of the multiplication ratio (e.g. when the clock
frequency is multiplied by four, the multiplication ratio will be H'04. With this LSI it
should be set to H'01.)
Division ratio : The inverse of the division ratio, as a negative number (e.g. when the
clock frequency is divided by two, the value of division ratio will be H'FE. H'FE = D'-
2. With this LSI it should be set to H'01.)
Multiplication ratio (1 byte) : The value of the multiplication ratio (e.g. when the clock
frequency is multiplied by four, the multiplication ratio will be H'04. Cannot be set for
this LSI.)
Division ratio : The inverse of the division ratio, as a negative number (e.g. when the
clock is divided by two, the value of division ratio will be H'FE. H'FE = D'-2. With this
LSI it should be set to H'01.)
H'06
H'BF
: Bit-rate selection error
: Error in input frequency
: Multiplication-ratio error*
: Operating frequency error*
: Sum checking error
The rate is not available.
This input frequency is not within the specified range.
The ratio does not match an available ratio.
The frequency is not within the specified range.
ERROR