HD64F3029XBL25V Renesas Electronics America, HD64F3029XBL25V Datasheet - Page 33

• Manufacturer Part Number: HD64F3029XBL25V
• Description: MCU 5V 512K,PB-FREE 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD64F3029XBL25V

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Feature
DMA controller
(DMAC)
16-bit timer,
3 channels
8-bit timer,
4 channels
Programmable
timing pattern
controller (TPC)
Watchdog
timer (WDT),
1 channel
Serial
communication
interface (SCI),
3 channels
Rev. 2.0, 06/04, page 4 of 980
Description
Short address mode
Full address mode
Maximum four channels available
Selection of I/O mode, idle mode, or repeat mode
Can be activated by compare match/input capture A interrupts from 16-bit
timer channels 0 to 2, conversion-end interrupts from the A/D converter,
transmit-data-empty and receive-data-full interrupts from the SCI, or external
requests
Maximum two channels available
Selection of normal mode or block transfer mode
Can be activated by compare match/input capture A interrupts from 16-bit
timer channels 0 to 2, conversion-end interrupts from the A/D converter,
external requests, or auto-request
Three 16-bit timer channels, capable of processing up to six pulse outputs
or six pulse inputs
16-bit timer counter (channels 0 to 2)
Two multiplexed output compare/input capture pins (channels 0 to 2)
Operation can be synchronized (channels 0 to 2)
PWM mode available (channels 0 to 2)
Phase counting mode available (channel 2)
DMAC can be activated by compare match/input capture A interrupts
(channels 0 to 2)
8-bit up-counter (external event count capability)
Two time constant registers
Two channels can be connected
Maximum 16-bit pulse output, using 16-bit timer as time base
Up to four 4-bit pulse output groups (or one 16-bit group, or two 8-bit
groups)
Non-overlap mode available
Output data can be transferred by DMAC
Reset signal can be generated by overflow
Usable as an interval timer
Selection of asynchronous or synchronous mode
Full duplex: can transmit and receive simultaneously
On-chip baud-rate generator
Smart card interface functions added