HD64F3029XBL25V Renesas Electronics America, HD64F3029XBL25V Datasheet - Page 680

• Manufacturer Part Number: HD64F3029XBL25V
• Description: MCU 5V 512K,PB-FREE 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD64F3029XBL25V

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

certainly be needed. When two or more selection commands are sent at once, the last command
will be valid.
All of these commands, except for the boot program status inquiry command (H'4F), will be valid
until the boot program receives the programming/erasing transition (H'40). The host can choose
the needed commands out of the commands and inquiries listed above. The boot program status
inquiry command (H'4F) is valid after the boot program has received the programming/erasing
transition command (H'40).
(1) Supported device inquiry
The boot program will return the device codes of supported devices and the product code of the
F-ZTAT in response to the supported device inquiry.
Command H'20
Response
(2) Device Selection
The boot program will set the supported device to the specified device code. The program will
return the selected device code in response to the inquiry after this setting has been made.
Command H'10
Command, H'20, (1 byte) : Inquiry regarding supported devices
Response, H'30, (1 byte) : Response to the supported device inquiry
Size (1 byte) : Number of bytes to be transmitted, excluding the command, amount of data,
and checksum, that is, the amount of data contributes by the product names, the number of
devices, characters, and device codes
A number of devices (1 byte) : The number of device types supported by the boot program
A number of characters (1 byte) : The number of characters in the device codes and boot
program’s name
Device code (4 bytes) : Code of the supporting product
Product name (n bytes) : Type name of the boot program in ASCII-coded characters
SUM (1 byte) : Checksum
The checksum is calculated so that the total number of all values from the command byte
to the SUM byte becomes H'00.
Command, H'10, (1 byte) : Device selection
H'30
A number of
characters
···
SUM
Size
Size
Device code
Device code
A number of
devices
Rev. 2.0, 06/04, page 651 of 980
Product name
SUM