EP4SE530H40I3 Altera, EP4SE530H40I3 Datasheet - Page 967

• Manufacturer Part Number: EP4SE530H40I3
• Description: IC STRATIX IV FPGA 530K 1517HBGA
• Manufacturer: Altera
• Series: STRATIX® IV Er

Specifications of EP4SE530H40I3

• Number Of Logic Elements/cells: 531200
• Number Of Labs/clbs: 21248
• Total Ram Bits: 27376
• Number Of I /o: 976
• Voltage - Supply: 0.87 V ~ 0.93 V
• Mounting Type: Surface Mount
• Operating Temperature: -40°C ~ 100°C
• Package / Case: 1517-HBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Gates: -

Chapter 1: ALTGX Transceiver Setup Guide for Stratix IV Devices
Parameter Settings
Table 1–1. MegaWizard Plug-In Manager Options (General Screen for Basic Mode) (Part 6 of 10)
February 2011 Altera Corporation
What is the channel width?
ALTGX Setting
Basic
Deterministic Latency
This option determines the FPGA fabric-Transceiver
interface width.
■
■
Basic (PMA Direct)
This option determines the FPGA fabric-Transceiver
interface width.
■
■
GIGE
This option determines the FPGA fabric-Transceiver
interface width. In GIGE mode, only 8 bits are allowed.
(OIF) CEI PHY Interface
This option selects the FPGA fabric-Transceiver width. In
(OIF) CEI PHY Interface mode, only 32 bits are allowed.
PCIe
This option determines the FPGA fabric-Transceiver
interface width.
■
■
SDI
This option determines the FPGA fabric-Transceiver
interface width:
■
■
■
■
Serial RapidIO
The channel width is fixed to 16 in Serial RapidIO mode.
Single-width mode—Selecting 8 or 10 bits bypasses
the byte serializer/deserializer. Selecting 16 or 20 bits
uses the byte serializer/deserializer.
Double-width mode—Selecting 16 or 20 bits
bypasses the byte serializer/deserializer. Selecting 32
or 40 bits uses the byte serializer/deserializer.
Single-width mode—You can select 8 or 10 bits.
Double-width mode— You can select 16 or 20 bits.
In PCIe Gen1 (2.5 Gbps) mode, 8 and 16 bits are
allowed.
In PCIe Gen2 (5 Gbps) mode, only 16 bits are allowed.
HD mode—10-bit and 20-bit channel widths are
allowed.
3G mode—only 20-bit channel width is allowed.
10-bit configuration—the byte serializer is not used.
20-bit configuration—the byte serializer is used.
Description
“Byte Serializer” and “Byte
Deserializer” sections in the
Transceiver Architecture in
Stratix IV Devices
Stratix IV Device Handbook Volume 3
Reference
chapter.
1–9