HD64F7047F50V Renesas Electronics America, HD64F7047F50V Datasheet - Page 637

• Manufacturer Part Number: HD64F7047F50V
• Description: IC H8 MCU FLASH 256K 100TQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7047r

Specifications of HD64F7047F50V

• Core Processor: SH-2
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: CAN, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Package: 100PQFP
• Family Name: SuperH
• Maximum Speed: 50 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 53
• Interface Type: CAN/SCI
• On-chip Adc: 16-chx10-bit
• Number Of Timers: 7
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

23.2.1
Pins Used in Both Modes
Pin
AUDMD
AUDRST
Pin Descriptions
Description
The mode is selected by changing the input level at this pin.
Low: Branch trace mode
High: RAM monitor mode
The input at this pin should be changed when AUDRST is low.
The AUD's internal buffers and logic are initialized by inputting a low level to
this pin. When this signal goes low, the AUD enters the reset state and the
AUD's internal buffers and logic are reset. When AUDRST goes high again
after the AUDMD level settles, the AUD starts operating in the selected mode.
Rev. 2.00, 09/04, page 595 of 720