HD64F7047F50V Renesas Electronics America, HD64F7047F50V Datasheet - Page 513

• Manufacturer Part Number: HD64F7047F50V
• Description: IC H8 MCU FLASH 256K 100TQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7047r

Specifications of HD64F7047F50V

• Core Processor: SH-2
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: CAN, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Package: 100PQFP
• Family Name: SuperH
• Maximum Speed: 50 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 53
• Interface Type: CAN/SCI
• On-chip Adc: 16-chx10-bit
• Number Of Timers: 7
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

• Remote frame reception
Unread Message Overwrite: If the receive message identifier matches the mailbox identifier, the
receive message is stored in the mailbox regardless of whether the mailbox contains an unread
message or not. If a message overwrite occurs, the corresponding bit (UMSR0 to UMSR31) is set
in the unread message register (UMSR). In overwriting an unread message, when a new message
is received before the corresponding bit in the receive complete register (RXPR) has been cleared,
the unread message register (UMSR) is set. If the unread interrupt flag (IRR9) in the interrupt
mask register (IMR) is set to the interrupt enable value at this time, an interrupt can be sent to the
CPU. Figure 15.11 shows a flowchart for unread message overwriting.
Two kinds of messages—data frames and remote frames—can be stored in mailboxes. A
remote frame differs from a data frame in that the value of the remote transmission request bit
(RTR) in the message control and the data field are 0 bytes long. The data length to be returned
in a data frame must be stored in the data length code (DLC) in the control field.
When a remote frame (RTR = recessive) is received, the corresponding bit is set in the remote
request wait register (RFPR). If the corresponding bit (MBIMR0 to MBIMR31) in the mailbox
interrupt mask register (MBIMR) and the remote frame request interrupt mask (IRR2) in the
interrupt mask register (IMR) are set to the interrupt enable value at this time, an interrupt
request (RM1) can be sent to the CPU.
Message control/message data read
Figure 15.11 Unread Message Overwrite Flowchart
Unread message overwrite
Interrupt to CPU (OVR1)
Clear IRR9
UMSR = 1
IMR9 = 1?
IRR9 = 1
End
No
Yes
: Settings by user
: Processing by hardware
Rev. 2.00, 09/04, page 471 of 720