HD64F7047F50V Renesas Electronics America, HD64F7047F50V Datasheet - Page 151

• Manufacturer Part Number: HD64F7047F50V
• Description: IC H8 MCU FLASH 256K 100TQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7047r

Specifications of HD64F7047F50V

• Core Processor: SH-2
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: CAN, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Package: 100PQFP
• Family Name: SuperH
• Maximum Speed: 50 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 53
• Interface Type: CAN/SCI
• On-chip Adc: 16-chx10-bit
• Number Of Timers: 7
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Section 8 Data Transfer Controller (DTC)
This LSI includes a data transfer controller (DTC). The DTC can be activated by an interrupt or
software, to transfer data.
Figure 8.1 shows a block diagram of the DTC.
The DTC’s register information is stored in the on-chip RAM. When the DTC is used, the RAME
bit in SYSCR must be set to 1.
8.1
Features
• Transfer possible over any number of channels
• Three transfer modes
Normal, repeat, and block transfer modes available
• One activation source can trigger a number of data transfers (chain transfer)
• Direct specification of 32-bit address space possible
• Activation by software is possible
• Transfer can be set in byte, word, or longword units
• The interrupt that activated the DTC can be requested to the CPU
• Module standby mode can be set
Rev. 2.00, 09/04, page 109 of 720