HD64F7047F50V Renesas Electronics America, HD64F7047F50V Datasheet - Page 191

• Manufacturer Part Number: HD64F7047F50V
• Description: IC H8 MCU FLASH 256K 100TQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7047r

Specifications of HD64F7047F50V

• Core Processor: SH-2
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: CAN, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Package: 100PQFP
• Family Name: SuperH
• Maximum Speed: 50 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 53
• Interface Type: CAN/SCI
• On-chip Adc: 16-chx10-bit
• Number Of Timers: 7
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

This LSI has an on-chip multi-function timer pulse unit (MTU) that comprises five 16-bit timer
channels.
The block diagram is shown in figure 10.1.
10.1
• Maximum 16-pulse input/output
• Selection of 8 counter input clocks for each channel
• The following operations can be set for each channel:
• Buffer operation settable for channels 0, 3, and 4
• Phase counting mode settable independently for each of channels 1 and 2
• Cascade connection operation
• Fast access via internal 16-bit bus
• 23 interrupt sources
• Automatic transfer of register data
• A/D converter conversion start trigger can be generated
• Module standby mode can be set
• Positive and negative 3-phase waveforms (6-phase waveforms in total) can be output by
• AC synchronous motor (brushless DC motor) drive mode can be set by channel 0, channel 3,
• Selection of chopping or level waveform outputs in AC synchronous motor drive mode
 Waveform output at compare match
 Input capture function
 Counter clear operation
 A maximum 12-phase PWM output is possible in combination with synchronous operation
channel 3 and channel 4 connected in complementary PWM or reset PWM mode
and channel 4 connected in complementary PWM or reset PWM mode.
Section 10 Multi-Function Timer Pulse Unit (MTU)
Multiple timer counters (TCNT) can be written to simultaneously
Simultaneous clearing by compare match and input capture is possible
Register simultaneous input/output is possible by synchronous counter operation
Features
Rev. 2.00, 09/04, page 149 of 720